VOLVO
ECM-1224 - Electronic throttle module, servo 1. Faulty signal
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
2 modeleS40 (1996–2004), V40 (1996–2004)
Pokaż modele wg rocznika i silnika (2)
Co oznacza ten kod błędu?
The current to the first phase of the throttle motor is outside its normal range, which the engine control module has registered. The second phase then takes over throttle control, and engine output is limited. The fault can lie in the connectors, the motor wiring or the throttle module.
Możliwe przyczyny
- Contact resistance in the connections
- Open or short circuit to ground or supply voltage in the throttle motor signal wires
- Defective throttle module
Co możesz zrobić
- 1Check the connectors to the throttle motor and its control unit for contact resistance and oxidation
- 2Have a workshop measure the resistance of the throttle motor and replace the motor if needed
- 3Clear the code and road test to see whether it returns
- 4If nothing is found, the fault may be intermittent or the throttle motor may be defective, which a workshop should check
Objawy, które możesz zauważyć4
- Malfunction indicator light is on
- The car performs worse
- Fuel consumption is high
- Cruise control does not work at all
Na co może wpływać usterka3
- Engine output is limited
- Lean-burn operation is not possible
- Cruise control is switched off
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.