ECM-1440
VOLVO
ECM-1440 - Generator. Faulty signal
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
3 modeleC30 (2007–2013), S40 (2004–2013), V50 (2004–2013)
Pokaż modele wg rocznika i silnika (3)
Co oznacza ten kod błędu?
The engine control module (ECM) controls the alternator using information from the CAN network, so that the battery gets a suitable charge. The fault is set when the information needed for that control is missing from the CAN network, and the cause lies in the central electronics module (CEM).
Możliwe przyczyny
- The cause lies in the central electronics module (CEM)
Co możesz zrobić
- 1First read the fault codes in the central electronics module (CEM) and fix them
- 2Clear the fault code in the CEM once it has been fixed, then clear this fault code in the engine control module
- 3If you have a diagnostic tool: check whether the CEM shows its own fault code for the alternator or the charging
- 4If the fault remains after the CEM check: have a workshop with diagnostic equipment check the CAN communication to the engine control module
Objawy, które możesz zauważyć1
- The “Generator not charging” warning lamp lights with the engine running
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.