VOLVO
ECM-1705 - Gear position sensor. Faulty signal
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
3 modeleC30 (2007–2013), S40 (2004–2013), V50 (2004–2013)
Pokaż modele wg rocznika i silnika (9)
- Volvo C30 (2007–2013)2008–2009Tylko silnik: B4184S11, B4184S8, B4204S3
- Volvo C30 (2007–2013)2010Tylko silnik: B4184S11, B4184S8, B4204S3, B4204S4
- Volvo C30 (2007–2013)2011–2013Tylko silnik: B4204S3, B4204S4
- Volvo S40 (2004–2013)2008–2009Tylko silnik: B4184S11, B4184S8, B4204S3
- Volvo S40 (2004–2013)2010Tylko silnik: B4184S11, B4184S8, B4204S3, B4204S4
- Volvo S40 (2004–2013)2011–2012Tylko silnik: B4204S3, B4204S4
- Volvo V50 (2004–2013)2008–2009Tylko silnik: B4184S11, B4184S8, B4204S3
- Volvo V50 (2004–2013)2010Tylko silnik: B4184S11, B4184S8, B4204S3, B4204S4
- Volvo V50 (2004–2013)2011–2012Tylko silnik: B4204S3, B4204S4
Co oznacza ten kod błędu?
During its self-test the ECM checks that the gear selector is in park (automatic gearbox) or that the gear lever is in neutral (manual gearbox). If it is not, fault code ECM-1705 is set.
Możliwe przyczyny
- The gear selector is not in park during the self-test (automatic gearbox)
- The gear lever is not in neutral during the self-test
Co możesz zrobić
- 1Check that the gear selector is in P (automatic gearbox) or that the gear lever is in neutral, then clear the fault code
- 2Switch the ignition off and on again with the selector or lever in the correct position, and check whether the code comes back
- 3If you have a diagnostic tool: check in live data how the gear position sensor reports as the selector is moved between positions
- 4If the code returns with the correct gear position, have a workshop check the gear position sensor
Objawy, które możesz zauważyć1
- No noticeable symptoms for the driver
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.