Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    ECM-213D
    VOLVO

    ECM-213D - Long-term fuel trim, bank 2. Signal too low

    Układ

    Sterownik silnika (ECM)

    Modele Volvo, których dotyczy ten kod błędu

    Dotyczy następujących modeli:

    2 modele

    S80 (1999–2006), XC90 (2003–)

    Pokaż modele wg rocznika i silnika (2)
    • Volvo S80 (1999–2006)2005–2006Tylko silnik: B6294S2, B6294T
    • Volvo XC90 (2003–)2005–2006Tylko silnik: B6294T

    Co oznacza ten kod błędu?

    The code is stored when the long-term fuel trim for bank 2 has nearly reached its limit at lower part load, even though the code is named for a signal that is too low. The mixture then deviates strongly from the target, and the cause can be a leak, fuel pressure, injectors, the mass air flow sensor, the engine oil or a damaged sensor.

    Możliwe przyczyny

    • Air leakage on the intake side
    • High fuel pressure
    • Leaking fuel injectors
    • Damaged mass air flow sensor
    • Contaminated engine oil or oil level too high
    • Damaged heated oxygen sensor on bank 2

    Co możesz zrobić

    1. 1Clear the code and road test the car to see whether it returns
    2. 2Check the intake system for air leakage, including the hose to the brake booster
    3. 3Look for fuel leaks at the fuel lines and note whether there is a smell of fuel
    4. 4Check that the oil level is between the min and max marks on the dipstick, and that the oil is not contaminated
    5. 5Have a diagnostic tool? Read the fuel trim for bank 2 in live data at idle, and see whether it is heading towards its upper limit
    6. 6If the fault remains, have a workshop measure the fuel pressure and check the injectors

    Objawy, które możesz zauważyć1

    • No noticeable symptoms for the driver

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.