Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    ECM-232D
    VOLVO

    ECM-232D - Rear heated oxygen sensor (HO2S), bank 2. Signal too low

    Układ

    Sterownik silnika (ECM)

    Modele Volvo, których dotyczy ten kod błędu

    Dotyczy następujących modeli:

    2 modele

    S80 (1999–2006), XC90 (2003–)

    Pokaż modele wg rocznika i silnika (2)
    • Volvo S80 (1999–2006)2005–2006Tylko silnik: B6294S2, B6294T
    • Volvo XC90 (2003–)2005–2006Tylko silnik: B6294T

    Co oznacza ten kod błędu?

    The signal from the rear oxygen sensor on bank 2 is too low. The fault can come from the signal or ground wire being shorted to ground, but a damaged sensor can also set the code. Oxygen sensor control is switched off while the fault is present.

    Możliwe przyczyny

    • Signal wire short-circuited to ground
    • Ground wire short-circuited to ground
    • Damaged rear oxygen sensor

    Co możesz zrobić

    1. 1Clear the code after reading it and road test to see whether it returns
    2. 2Inspect the signal wire for chafing or places where it may have touched the body
    3. 3With the sensor connector unplugged, use a multimeter to confirm that the signal and ground wires have no contact with the body
    4. 4If you have a diagnostic tool: read the sensor signal in live data and see whether it sits at a low value without moving
    5. 5If the fault remains, have a workshop try a new sensor

    Objawy, które możesz zauważyć1

    • Malfunction indicator lamp (MIL) lit

    Na co może wpływać usterka2

    • Rear oxygen sensor control is switched off
    • Catalytic converter diagnostics are switched off

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.