VOLVO
ECM-2360 - Injector 6. Signal missing. Intermittent fault
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
2 modeleS80 (1999–2006), XC90 (2003–)
Co oznacza ten kod błędu?
The signal to injector 6 has dropped out briefly but is not present now. The fault is sporadic and may lie in the connector, the wire to the valve or the feed from the system relay.
Możliwe przyczyny
- Open circuit in the signal wire
- Open circuit in the power supply to the injector
- Contact resistance in the connections
Co możesz zrobić
- 1Check that the connector to injector 6 is secure and free from oxidation and play
- 2With the ignition on, press gently on the connector at valve 6 and see whether the signal briefly drops out
- 3Use a multimeter to check that the feed from the system relay to injector 6 is not interrupted
- 4If you have a diagnostic tool: note the fault status after a test drive and judge whether the fault is permanent or temporary
- 5If the fault remains, have a workshop decide whether the wiring or the valve needs attention
Objawy, które możesz zauważyć2
- Engine not firing on all cylinders
- Malfunction indicator lamp (MIL) lit
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.