VOLVO
ECM-2456 - Pressure sensor, particle filter. Signal missing
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
4 modeleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Pokaż modele wg rocznika i silnika (10)
- Volvo C30 (2007–2013)2007Tylko silnik: D4204T
- Volvo C30 (2007–2013)2008–2010Tylko silnik: D4204T · Tylko skrzynia biegów: MMT6, MPS6
- Volvo C70 (2006–2013)2008Tylko silnik: D4204T
- Volvo C70 (2006–2013)2009–2010Tylko silnik: D4204T · Tylko skrzynia biegów: MMT6, MPS6
- Volvo S40 (2004–2013)2005–2006Tylko silnik: D4204T, D4204T2
- Volvo S40 (2004–2013)2007Tylko silnik: D4204T
- Volvo S40 (2004–2013)2008–2010Tylko silnik: D4204T · Tylko skrzynia biegów: MMT6, MPS6
- Volvo V50 (2004–2013)2005–2006Tylko silnik: D4204T, D4204T2
- Volvo V50 (2004–2013)2007Tylko silnik: D4204T
- Volvo V50 (2004–2013)2008–2010Tylko silnik: D4204T · Tylko skrzynia biegów: MMT6, MPS6
Co oznacza ten kod błędu?
The ECM compares pressure readings from each side of the particle filter and checks that the sensor signal follows a calculated value. If the signal is missing altogether, the code is stored. The cause can be a poor connection, an open circuit in the wiring or a damaged pressure sensor.
Możliwe przyczyny
- Loose connections, contact resistance or oxidation at the terminals
- Open circuit in the supply cable to the sensor
- Open circuit in the ground lead
- Open circuit in the signal cable
- Damaged particle filter pressure sensor
Co możesz zrobić
- 1Read and note the code, clear it and road test to see whether it returns
- 2Look at the terminals on the pressure sensor and make sure they are fully seated, not loose and clean
- 3Follow the supply, ground and signal leads from the sensor and look for breaks, chafing and pinch damage
- 4Use a multimeter to check that each lead is continuous all the way between the sensor and the control module, with no break
- 5If the leads are intact, have a workshop with diagnostic equipment check the pressure sensor
Objawy, które możesz zauważyć2
- The check engine light comes on
- Poor performance, the car lacks power
Na co może wpływać usterka1
- Engine output and speed may be limited
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.