ECM-24BB
VOLVO
ECM-24BB - Front heated oxygen sensor (HO2S), bank 1. Signal missing
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
5 modeliS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Pokaż modele wg rocznika i silnika (14)
- Volvo S60 (2001–2009)2005–2006Tylko silnik: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2007Tylko silnik: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2008–2009Tylko silnik: B5204T5, B5244T5, B5254T2
- Volvo S80 (1999–2006)2005–2006Tylko silnik: B5204T5, B5244T4, B5254T2, B6294S2, B6294T
- Volvo V70 (2000–2008)2005Tylko silnik: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2006–2007Tylko silnik: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2008Tylko silnik: B5254T2
- Volvo V70 XC / XC70 (2001–2007)2005Wszystkie silniki oprócz: D5244T
- Volvo V70 XC / XC70 (2001–2007)2006Tylko silnik: B5244T4, B5254T2
- Volvo V70 XC / XC70 (2001–2007)2007Tylko silnik: B5254T2
- Volvo XC90 (2003–)2005–2006Tylko silnik: B5254T2, B6294T
- Volvo XC90 (2003–)2007–2012Tylko silnik: B5254T2
- Volvo XC90 (2003–)2013–2014Tylko silnik: B5254T9
- Volvo XC90 (2003–)2015
Co oznacza ten kod błędu?
Although the code is titled signal missing, it applies when the learned correction values of the two oxygen sensors diverge too far. The engine control module (ECM) compares the two values and stores the code when the deviation is too large. The fault may then lie in the front or rear sensor circuit.
Możliwe przyczyny
- Leakage in the exhaust system
- Oxygen sensor indicates an incorrectly rich fuel/air mixture
- Contact resistance or oxidation at the connections
- Damaged oxygen sensor
Co możesz zrobić
- 1Read and note the code, clear it and road test to see whether it returns
- 2Look at the connectors to the front and rear oxygen sensors for contact resistance and oxidation
- 3Look for air leaks in the exhaust system, such as cracks and loose joints
- 4If the fault remains after these checks, have a workshop try replacing the oxygen sensors, since the code can also be set by a damaged front or rear sensor
Objawy, które możesz zauważyć1
- The malfunction indicator lamp (MIL) is lit
Na co może wpływać usterka2
- Oxygen sensor control is switched off
- Catalytic converter diagnostics are switched off
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.