Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    ECM-24C0
    VOLVO

    ECM-24C0 - Front heated oxygen sensor (HO2S), bank 1. Faulty signal

    Układ

    Sterownik silnika (ECM)

    Modele Volvo, których dotyczy ten kod błędu

    Dotyczy następujących modeli:

    9 modeli

    C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)

    Pokaż modele wg rocznika i silnika (23)
    • Volvo C30 (2007–2013)2007Tylko silnik: B5254T3
    • Volvo C30 (2007–2013)2008–2013Tylko silnik: B5254T7
    • Volvo C70 (2006–2013)2006–2007Tylko silnik: B5254T3
    • Volvo C70 (2006–2013)2008–2013Tylko silnik: B5254T7
    • Volvo S40 (2004–2013)2005–2007Tylko silnik: B5254T3
    • Volvo S40 (2004–2013)2008Tylko silnik: B5254T3, B5254T7
    • Volvo S40 (2004–2013)2009–2012Tylko silnik: B5254T7
    • Volvo S60 (2001–2009)2005–2006Tylko silnik: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
    • Volvo S60 (2001–2009)2007Tylko silnik: B5204T5, B5244T5, B5254T2, B5254T4
    • Volvo S60 (2001–2009)2008–2009Tylko silnik: B5204T5, B5244T5, B5254T2
    • Volvo S80 (1999–2006)2005–2006Tylko silnik: B5204T5, B5244T4, B5254T2, B6294S2, B6294T
    • Volvo V50 (2004–2013)2005–2007Tylko silnik: B5254T3
    • Volvo V50 (2004–2013)2008–2012Tylko silnik: B5254T7
    • Volvo V70 (2000–2008)2005Tylko silnik: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
    • Volvo V70 (2000–2008)2006–2007Tylko silnik: B5204T5, B5244T5, B5254T2, B5254T4
    • Volvo V70 (2000–2008)2008Tylko silnik: B5254T2
    • Volvo V70 XC / XC70 (2001–2007)2005Wszystkie silniki oprócz: D5244T
    • Volvo V70 XC / XC70 (2001–2007)2006Tylko silnik: B5244T4, B5254T2
    • Volvo V70 XC / XC70 (2001–2007)2007Tylko silnik: B5254T2
    • Volvo XC90 (2003–)2005–2006Tylko silnik: B5254T2, B6294T
    • Volvo XC90 (2003–)2007–2012Tylko silnik: B5254T2
    • Volvo XC90 (2003–)2013–2014Tylko silnik: B5254T9
    • Volvo XC90 (2003–)2015

    Co oznacza ten kod błędu?

    The engine control module (ECM) checks the front oxygen sensor against the rear sensor and against what it expects from the engine. If the front sensor shows only air and no fuel/air mixture, or its signal conflicts with the rear sensor or with what is expected, the code is stored. The fault can lie in the front or rear sensor circuit.

    Możliwe przyczyny

    • Oxygen sensor fitted incorrectly in the exhaust system
    • Leakage in the exhaust system
    • Short circuit to supply voltage or ground in the signal cable or in the pump and calibration current cables
    • Open circuit in the signal cable (+)
    • Damaged front heated oxygen sensor

    Co możesz zrobić

    1. 1Read and note the code, clear it and road test to see whether it returns
    2. 2Check that the oxygen sensor is correctly fitted in the exhaust system and that there are no leaks around it
    3. 3Look for air leaks in the exhaust system, such as cracks and leaking joints
    4. 4Follow the cables to the oxygen sensor and use a multimeter to check that they have no open circuit and are not short-circuited to supply voltage or ground
    5. 5If the cables are intact, have a workshop try a new oxygen sensor, since a damaged front or rear sensor can also cause the fault

    Objawy, które możesz zauważyć1

    • The malfunction indicator lamp (MIL) is lit

    Na co może wpływać usterka3

    • Oxygen sensor control is switched off
    • Long-term fuel trim is switched off
    • Catalytic converter diagnostics are switched off

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.