Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    ECM-2550
    VOLVO

    ECM-2550 - Fuel system. Too low pressure

    Układ

    Sterownik silnika (ECM)

    Modele Volvo, których dotyczy ten kod błędu

    Ten kod błędu ma różne znaczenie w zależności od modelu, rocznika lub silnika. Wybierz znaczenie, które dotyczy Twojego samochodu.

    Dotyczy następujących modeli:

    8 modeli

    C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)

    Pokaż modele wg rocznika i silnika (20)
    • Volvo C30 (2007–2013)2007Tylko silnik: D5244T8, D5244T9
    • Volvo C30 (2007–2013)2008–2010Tylko silnik: D5244T13, D5244T8, D5244T9
    • Volvo C70 (2006–2013)2007Tylko silnik: D5244T8, D5244T9
    • Volvo C70 (2006–2013)2008–2010Tylko silnik: D5244T13, D5244T8, D5244T9
    • Volvo S40 (2004–2013)2006Tylko silnik: D5244T8
    • Volvo S40 (2004–2013)2007Tylko silnik: D5244T8, D5244T9
    • Volvo S40 (2004–2013)2008–2010Tylko silnik: D5244T13, D5244T8, D5244T9
    • Volvo S60 (2001–2009)2006Tylko silnik: D5244T4, D5244T5, D5244T6, D5244T7
    • Volvo S60 (2001–2009)2007–2009Tylko silnik: D5244T4, D5244T5, D5244T7
    • Volvo V50 (2004–2013)2006Tylko silnik: D5244T8
    • Volvo V50 (2004–2013)2007Tylko silnik: D5244T8, D5244T9
    • Volvo V50 (2004–2013)2008–2010Tylko silnik: D5244T13, D5244T8, D5244T9
    • Volvo V70 (2000–2008)2006Tylko silnik: D5244T4, D5244T5, D5244T6, D5244T7
    • Volvo V70 (2000–2008)2007Tylko silnik: D5244T4, D5244T5, D5244T7
    • Volvo V70 (2000–2008)2008Tylko silnik: D5244T5, D5244T7
    • Volvo V70 XC / XC70 (2001–2007)2006–2007Tylko silnik: D5244T4
    • Volvo XC90 (2003–)2006–2007Tylko silnik: D5244T4
    • Volvo XC90 (2003–)2008–2010Tylko silnik: D5244T4, D5244T5
    • Volvo XC90 (2003–)2011Tylko silnik: D5244T18, D5244T4, D5244T5
    • Volvo XC90 (2003–)2012Wszystkie silniki oprócz: B5254T2, B6324S5

    Co oznacza ten kod błędu?

    At certain operating modes, with a warm engine, the engine control module (ECM) regulates fuel pressure using the fuel flow control valve. If the ECM detects that the fuel pressure is too low in such a mode, the code is set. The fault may be caused by a leak, air in the fuel lines, a clogged fuel filter or a damaged component in the fuel system.

    Możliwe przyczyny

    • Leakage in the fuel system
    • Air in the fuel lines
    • Clogged fuel filter
    • Damaged tank pump
    • Damaged fuel pressure sensor
    • Damaged fuel flow control valve

    Co możesz zrobić

    1. 1Read and act on any fault codes for the tank pump first, then clear the code and road test the car
    2. 2Look for fuel leaks at the connections and the injectors, and check that the fuel filter is not clogged
    3. 3Check that the fuel lines are not kinked and that the fuel pressure sensor connector is secure and free from oxidation
    4. 4With diagnostic equipment, follow the fuel pressure sensor's live data with the engine running and see whether the value drops under load
    5. 5Have a workshop check the fuel flow control valve and the tank pump if the fault returns after these checks

    Objawy, które możesz zauważyć2

    • Message in the display
    • The engine stalls

    Na co może wpływać usterka1

    • The engine control module uses a calculated value instead of the measured signal

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.