VOLVO
ECM-256B - Front heated oxygen sensor (HO2S), bank 2. Signal missing
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
2 modeleS80 (1999–2006), XC90 (2003–)
Pokaż modele wg rocznika i silnika (2)
Co oznacza ten kod błędu?
Although the fault is shown as a missing signal, it concerns an implausibly high signal from the oxygen sensor on bank 2 at fuel shut-off, at a time when the calibration current has stopped. Poor contact in the connections or a damaged sensor may be the cause.
Możliwe przyczyny
- Contact resistance and oxidation in the connectors
- Open circuit in the wire carrying the calibration current
- Damaged front oxygen sensor on bank 2
Co możesz zrobić
- 1Read the code, clear it and road test the car to see whether it returns
- 2Check that the connector at the lambda sensor is secure and clean. Do not use rust solvent spray or grease in the connector
- 3Look for breaks and chafing on the wires to the lambda sensor, and check that they do not rest against hot parts
- 4Use a multimeter to check that the wires to the lambda sensor have no open circuit
- 5If the connector and wiring are intact the sensor may be damaged; have a workshop check it or replace it
Objawy, które możesz zauważyć1
- Malfunction indicator lamp (MIL) on
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.