Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    ECM-25AB
    VOLVO

    ECM-25AB - Front heated oxygen sensor (HO2S), bank 2. Signal missing

    Układ

    Sterownik silnika (ECM)

    Modele Volvo, których dotyczy ten kod błędu

    Dotyczy następujących modeli:

    2 modele

    S80 (1999–2006), XC90 (2003–)

    Pokaż modele wg rocznika i silnika (2)
    • Volvo S80 (1999–2006)2005–2006Tylko silnik: B6294S2, B6294T
    • Volvo XC90 (2003–)2005–2006Tylko silnik: B6294T

    Co oznacza ten kod błędu?

    The engine control module (ECM) has registered an open circuit in the ground wire to the oxygen sensor on bank 2. The signal is therefore missing, and the fault may lie in the ground wire or in the sensor itself.

    Możliwe przyczyny

    • Open circuit in the ground wire
    • Damaged front oxygen sensor on bank 2

    Co możesz zrobić

    1. 1Read the code, clear it and road test the car to see whether it returns
    2. 2Check that the connector at the lambda sensor is fully engaged and clean, with no oxidation or contact resistance. Do not use rust solvent spray or grease
    3. 3Use a multimeter to check that the ground wire from the lambda sensor is unbroken all the way
    4. 4Look for chafed spots and breaks in the ground wire, especially where it is fixed to the body
    5. 5If the ground wire is intact the sensor may be damaged; have a workshop check it or replace it

    Objawy, które możesz zauważyć1

    • Malfunction indicator lamp (MIL) on

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.