VOLVO
ECM-25BB - Front heated oxygen sensor (HO2S), bank 2. Signal missing
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
2 modeleS80 (1999–2006), XC90 (2003–)
Pokaż modele wg rocznika i silnika (2)
Co oznacza ten kod błędu?
Although the fault is shown as a missing signal, the ECM compares the learned correction values for the front and rear oxygen sensors on bank 2. If they differ too much from each other, the code is set. The problem could lie in either the front or the rear sensor circuit.
Możliwe przyczyny
- Leakage in the exhaust system
- One of the oxygen sensors shows a richer mixture than the other
- Contact resistance or oxidation in the connectors
- Damaged oxygen sensor
Co możesz zrobić
- 1Look for air leaks in the exhaust system, especially upstream of the oxygen sensors
- 2Read the code, clear it and road test the car to see whether it returns
- 3Check the oxygen sensor connectors for contact resistance and oxidation. No rust solvent spray or grease in the connectors
- 4With diagnostic equipment, compare the front and rear oxygen sensor live data while driving and see whether they differ more than expected
- 5If the connectors and exhaust are in order, one of the sensors may be damaged. Have a workshop check them
Objawy, które możesz zauważyć1
- Malfunction indicator lamp (MIL) on
Na co może wpływać usterka2
- Oxygen sensor control is switched off
- Catalyst diagnostics are switched off
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.