ECM-2A10
VOLVO
ECM-2A10 - Fuel temperature sensor. Signal too high
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Ten kod błędu ma różne znaczenie w zależności od modelu, rocznika lub silnika. Wybierz znaczenie, które dotyczy Twojego samochodu.
Dotyczy następujących modeli:
9 modeliC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Pokaż modele wg rocznika i silnika (20)
- Volvo C30 (2007–2013)2007Tylko silnik: B5254T3
- Volvo C30 (2007–2013)2008–2013Tylko silnik: B5254T7
- Volvo C70 (2006–2013)2006–2007Tylko silnik: B5254T3
- Volvo C70 (2006–2013)2008–2013Tylko silnik: B5254T7
- Volvo S40 (2004–2013)2006–2007Tylko silnik: B5254T3
- Volvo S40 (2004–2013)2008Tylko silnik: B5254T3, B5254T7
- Volvo S40 (2004–2013)2009–2012Tylko silnik: B5254T7
- Volvo S60 (2001–2009)2006Tylko silnik: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2007Tylko silnik: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2008–2009Tylko silnik: B5204T5, B5244T5, B5254T2
- Volvo S80 (1999–2006)2006Tylko silnik: B5204T5, B5254T2
- Volvo V50 (2004–2013)2006–2007Tylko silnik: B5254T3
- Volvo V50 (2004–2013)2008–2012Tylko silnik: B5254T7
- Volvo V70 (2000–2008)2006–2007Tylko silnik: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2008Tylko silnik: B5254T2
- Volvo V70 XC / XC70 (2001–2007)2006Tylko silnik: B5244T4, B5254T2
- Volvo V70 XC / XC70 (2001–2007)2007Tylko silnik: B5254T2
- Volvo XC90 (2003–)2006–2012Tylko silnik: B5254T2
- Volvo XC90 (2003–)2013–2014Tylko silnik: B5254T9
- Volvo XC90 (2003–)2015
Co oznacza ten kod błędu?
The engine control module compares the fuel temperature signal while driving with the readings from the intake and engine temperature sensors. If the fuel temperature deviates too far from the others, the fault is set. The cause may be poor contact or a damaged fuel temperature sensor.
Możliwe przyczyny
- Contact resistance or oxidation in the connections
- Damaged fuel temperature sensor
Co możesz zrobić
- 1Switch off the ignition and check the connector at the fuel pressure sensor, where the temperature sensor sits: it should be secure and clean
- 2With a diagnostic tool, compare the fuel temperature in live data with the intake air and engine temperatures. When the engine is cold these should be close to each other
- 3Start the engine, let it warm up and read the code again to see whether the fault remains
- 4If the connector is in order but the fault remains, have a workshop check the fuel temperature sensor, which is built into the fuel pressure sensor
Objawy, które możesz zauważyć1
- Malfunction indicator lamp (MIL) lit
Na co może wpływać usterka1
- A predefined fuel temperature value is used
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.