VOLVO
ECM-2B30 - Particulate trap. Faulty signal
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
8 modeliC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Pokaż modele wg rocznika i silnika (20)
- Volvo C30 (2007–2013)2007Tylko silnik: D5244T8, D5244T9
- Volvo C30 (2007–2013)2008–2010Tylko silnik: D5244T13, D5244T8, D5244T9
- Volvo C70 (2006–2013)2007Tylko silnik: D5244T8, D5244T9
- Volvo C70 (2006–2013)2008–2010Tylko silnik: D5244T13, D5244T8, D5244T9
- Volvo S40 (2004–2013)2006Tylko silnik: D5244T8
- Volvo S40 (2004–2013)2007Tylko silnik: D5244T8, D5244T9
- Volvo S40 (2004–2013)2008–2010Tylko silnik: D5244T13, D5244T8, D5244T9
- Volvo S60 (2001–2009)2006Tylko silnik: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo S60 (2001–2009)2007–2009Tylko silnik: D5244T4, D5244T5, D5244T7
- Volvo V50 (2004–2013)2006Tylko silnik: D5244T8
- Volvo V50 (2004–2013)2007Tylko silnik: D5244T8, D5244T9
- Volvo V50 (2004–2013)2008–2010Tylko silnik: D5244T13, D5244T8, D5244T9
- Volvo V70 (2000–2008)2006Tylko silnik: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo V70 (2000–2008)2007Tylko silnik: D5244T4, D5244T5, D5244T7
- Volvo V70 (2000–2008)2008Tylko silnik: D5244T5, D5244T7
- Volvo V70 XC / XC70 (2001–2007)2006–2007Tylko silnik: D5244T4
- Volvo XC90 (2003–)2006–2007Tylko silnik: D5244T4
- Volvo XC90 (2003–)2008–2010Tylko silnik: D5244T4, D5244T5
- Volvo XC90 (2003–)2011Tylko silnik: D5244T18, D5244T4, D5244T5
- Volvo XC90 (2003–)2012Wszystkie silniki oprócz: B5254T2, B6324S5
Co oznacza ten kod błędu?
The engine control module (ECM) monitors the pressure difference before and after the particulate trap. The fault code is set when the signal from the differential pressure sensor is faulty, for example because of swapped or damaged hoses, poor contact or a damaged sensor.
Możliwe przyczyny
- The hoses to the particulate trap pressure sensor have been swapped
- Damaged connection hose or pipe to the differential pressure sensor
- Contact resistance or oxidation in the connector
- Open circuit in the signal wire
- Damaged differential pressure sensor
Co możesz zrobić
- 1Check the hoses and pipes to the differential pressure sensor for damage and leaks
- 2Check that the hoses are not swapped with each other
- 3Check the connector at the differential pressure sensor for contact resistance and oxidation, and make sure it is secure
- 4If you have a diagnostic tool: read the differential pressure sensor signal in live data and check that it responds when the engine idles
- 5If the fault remains, have a workshop measure the supply voltage to the sensor and check the wiring
Objawy, które możesz zauważyć1
- A message appears in the information display
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.