VOLVO
ECM-2B40 - Particulate trap. Faulty signal
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
8 modeliC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Pokaż modele wg rocznika i silnika (20)
- Volvo C30 (2007–2013)2007Tylko silnik: D5244T8, D5244T9
- Volvo C30 (2007–2013)2008–2010Tylko silnik: D5244T13, D5244T8, D5244T9
- Volvo C70 (2006–2013)2007Tylko silnik: D5244T8, D5244T9
- Volvo C70 (2006–2013)2008–2010Tylko silnik: D5244T13, D5244T8, D5244T9
- Volvo S40 (2004–2013)2006Tylko silnik: D5244T8
- Volvo S40 (2004–2013)2007Tylko silnik: D5244T8, D5244T9
- Volvo S40 (2004–2013)2008–2010Tylko silnik: D5244T13, D5244T8, D5244T9
- Volvo S60 (2001–2009)2006Tylko silnik: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo S60 (2001–2009)2007–2009Tylko silnik: D5244T4, D5244T5, D5244T7
- Volvo V50 (2004–2013)2006Tylko silnik: D5244T8
- Volvo V50 (2004–2013)2007Tylko silnik: D5244T8, D5244T9
- Volvo V50 (2004–2013)2008–2010Tylko silnik: D5244T13, D5244T8, D5244T9
- Volvo V70 (2000–2008)2006Tylko silnik: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo V70 (2000–2008)2007Tylko silnik: D5244T4, D5244T5, D5244T7
- Volvo V70 (2000–2008)2008Tylko silnik: D5244T5, D5244T7
- Volvo V70 XC / XC70 (2001–2007)2006–2007Tylko silnik: D5244T4
- Volvo XC90 (2003–)2006–2007Tylko silnik: D5244T4
- Volvo XC90 (2003–)2008–2010Tylko silnik: D5244T4, D5244T5
- Volvo XC90 (2003–)2011Tylko silnik: D5244T18, D5244T4, D5244T5
- Volvo XC90 (2003–)2012Wszystkie silniki oprócz: B5254T2, B6324S5
Co oznacza ten kod błędu?
The engine control module (ECM) compares the pressure difference with a calculation model to check the particulate trap and the catalytic converter. The fault code is set when the particulate trap is blocked or clogged, or when the catalytic converter is damaged.
Możliwe przyczyny
- The particulate trap is full of soot
- Damaged connection hose or pipe to the differential pressure sensor
- Damaged differential pressure sensor
- Damaged particulate trap
- Damaged catalytic converter
Co możesz zrobić
- 1Read and trace other stored fault codes first. This code can be caused by faults in other parts of the engine
- 2Check that the hoses to the intake system are secure and not leaking
- 3Check the hoses and pipes to the differential pressure sensor for damage and leaks
- 4If you have a diagnostic tool: follow the pressure difference in live data during a road test and see whether it rises clearly
- 5Have a workshop check the particulate trap and the catalytic converter, as they may be damaged and need assessing
Objawy, które możesz zauważyć2
- Poor performance
- A message appears in the information display
Na co może wpływać usterka2
- The car runs in limp-home mode
- Engine torque is limited
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.