VOLVO
ECM-2C0D - Injector cyl 1. Signal too low
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
2 modeleS80 (1999–2006), XC90 (2003–)
Pokaż modele wg rocznika i silnika (2)
Co oznacza ten kod błędu?
The ECM monitors the circuit to the injector for cylinder 1. The fault code is set when the signal in that circuit is too low, which can be caused by the signal wire being shorted to ground or by a damaged injector.
Możliwe przyczyny
- Signal wire short-circuited to ground
- Damaged injector
Co możesz zrobić
- 1Read and note the code, clear it and road test to see whether it returns
- 2Check the connector and wire to the injector for cylinder 1 for chafing where it may have touched the body
- 3Use a multimeter to check that the signal wire to the injector for cylinder 1 has no contact with ground (the body)
- 4If you have a diagnostic tool: compare the signal of the cylinder 1 injector with the other cylinders in live data
- 5If the fault remains after checking the wire, have a workshop check the injector
Objawy, które możesz zauważyć2
- The malfunction indicator lamp (MIL) is on
- The engine is not running on all cylinders
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.