ECM-3020
VOLVO
ECM-3020 - Engine control module (ECM), internal fault. Faulty signal
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Ten kod błędu ma różne znaczenie w zależności od modelu, rocznika lub silnika. Wybierz znaczenie, które dotyczy Twojego samochodu.
Dotyczy następujących modeli:
5 modeliS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Pokaż modele wg rocznika i silnika (14)
- Volvo S60 (2001–2009)2005–2006Tylko silnik: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2007Tylko silnik: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2008–2009Tylko silnik: B5204T5, B5244T5, B5254T2
- Volvo S80 (1999–2006)2005–2006Tylko silnik: B5204T5, B5244T4, B5254T2, B6294S2, B6294T
- Volvo V70 (2000–2008)2005Tylko silnik: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2006–2007Tylko silnik: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2008Tylko silnik: B5254T2
- Volvo V70 XC / XC70 (2001–2007)2005Wszystkie silniki oprócz: D5244T
- Volvo V70 XC / XC70 (2001–2007)2006Tylko silnik: B5244T4, B5254T2
- Volvo V70 XC / XC70 (2001–2007)2007Tylko silnik: B5254T2
- Volvo XC90 (2003–)2005–2006Tylko silnik: B5254T2, B6294T
- Volvo XC90 (2003–)2007–2012Tylko silnik: B5254T2
- Volvo XC90 (2003–)2013–2014Tylko silnik: B5254T9
- Volvo XC90 (2003–)2015
Co oznacza ten kod błędu?
The control module has found a fault in its own internal circuit for knock control. Because the fault lies in the control module itself, it cannot be fixed by searching the wiring. The engine warning lamp may light, and engine power and boost pressure are limited until the fault is repaired.
Możliwe przyczyny
- Damaged engine control module (ECM)
Co możesz zrobić
- 1Clear the fault code and drive the car briefly; if the fault returns, the control module is probably damaged
- 2Check the battery and that the battery cables and ground connections are secure, since interference at start-up can cause temporary faults
- 3Have a workshop replace the control module if the fault remains or keeps returning
Objawy, które możesz zauważyć2
- Engine warning lamp lit
- Poor performance
Na co może wpływać usterka2
- Ignition advance is pulled back to protect the engine
- Boost pressure is reduced
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.