Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    ECM-3250
    VOLVO

    ECM-3250 - Misfire cylinder 5, start-up. Start up

    Układ

    Sterownik silnika (ECM)

    Modele Volvo, których dotyczy ten kod błędu

    Dotyczy następujących modeli:

    2 modele

    S80 (1999–2006), XC90 (2003–)

    Pokaż modele wg rocznika i silnika (2)
    • Volvo S80 (1999–2006)2005–2006Tylko silnik: B6294S2, B6294T
    • Volvo XC90 (2003–)2005–2006Tylko silnik: B6294T

    Co oznacza ten kod błędu?

    The engine has misfired on cylinder five during the first revolutions after it was started. The control module stores the code when the misfires are detected during starting and indicates cylinder five. The fault may have causes in the fuel, the fuel pressure, the intake or the injection.

    Możliwe przyczyny

    • Low fuel level
    • Engine never reaches full operating temperature across repeated cold starts
    • Contaminated or incorrect fuel
    • Poor fuel quality, for example summer fuel in winter
    • Air leakage
    • Blocked crankcase ventilation

    Co możesz zrobić

    1. 1First investigate the other fault codes that affect camshaft control or the camshaft reset valve
    2. 2Check the fuel level in the tank and that the engine oil level is correct
    3. 3Check the spark plug on cylinder five
    4. 4Check the crankcase ventilation for blockages
    5. 5Check the intake system for leaks
    6. 6If the fault remains, have a workshop check the fuel pressure

    Objawy, które możesz zauważyć5

    • Engine warning lamp lit
    • The engine misfires
    • The engine is difficult to start
    • Poor performance
    • Uneven idle

    Na co może wpływać usterka2

    • Rear oxygen sensor control is switched off
    • Lambda control is switched off

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.