VOLVO
ECM-353D - Ignition coil cylinder 4, signal. Signal too low
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
5 modeliS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Pokaż modele wg rocznika i silnika (13)
- Volvo S60 (2001–2009)2005–2006Tylko silnik: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2007Tylko silnik: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2008–2009Tylko silnik: B5204T5, B5244T5, B5254T2
- Volvo S80 (1999–2006)2005–2006Tylko silnik: B5204T5, B5244T4, B5254T2
- Volvo V70 (2000–2008)2005Tylko silnik: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2006–2007Tylko silnik: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2008Tylko silnik: B5254T2
- Volvo V70 XC / XC70 (2001–2007)2005Wszystkie silniki oprócz: D5244T
- Volvo V70 XC / XC70 (2001–2007)2006Tylko silnik: B5244T4, B5254T2
- Volvo V70 XC / XC70 (2001–2007)2007Tylko silnik: B5254T2
- Volvo XC90 (2003–)2005–2012Tylko silnik: B5254T2
- Volvo XC90 (2003–)2013–2014Tylko silnik: B5254T9
- Volvo XC90 (2003–)2015
Co oznacza ten kod błędu?
The engine control module has detected that the signal to the ignition coil for cylinder 4 is too low. The coil then does not receive the control it needs to ignite the mixture in that cylinder, so the engine can misfire there. The fault concerns the signal wire and the coil, and the connector at the coil is a good first thing to check.
Możliwe przyczyny
- The signal wire to the ignition coil is short-circuited to ground
- Damaged ignition coil
Co możesz zrobić
- 1Check that the connector at ignition coil 4 is fully seated and free from corrosion
- 2Follow the signal wire from the coil and look for chafing, pinch damage or places where it may touch the body
- 3Use a multimeter to check that the signal wire to the coil has no contact with ground (the body), with the connector unplugged at the coil
- 4Read and note the code, clear it and road test to see whether it returns
- 5If the wire is intact: have a workshop with diagnostic equipment check the ignition coil
Objawy, które możesz zauważyć2
- The malfunction indicator lamp is on
- Cylinder 4 is not firing properly, so the engine runs roughly
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.