VOLVO
ECM-365B - Ignition coil cylinder 6, signal. Signal missing
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
2 modeleS80 (1999–2006), XC90 (2003–)
Pokaż modele wg rocznika i silnika (2)
Co oznacza ten kod błędu?
The engine control module reports that the signal to ignition coil 6 is missing. The coil then gets no control, and cylinder 6 can misfire. The fault can lie in a poor connection, a broken signal wire or a damaged ignition coil, and the connector is a good place to start.
Możliwe przyczyny
- High contact resistance at the connector
- Open circuit in the signal line to the coil
- Damaged ignition coil
Co możesz zrobić
- 1Check that the connector at ignition coil 6 is fully seated and clean, without oxidation
- 2Follow the signal wire from the coil and look for breaks, chafing or places where it may have been pinched
- 3Use a multimeter to confirm that the signal wire is intact, with the connector unplugged at the coil
- 4Read and clear the code, then road test to see whether it returns
- 5If the wire is intact but the fault remains: have a workshop with diagnostic equipment check the ignition coil
Objawy, które możesz zauważyć2
- The malfunction indicator lamp is on
- The engine does not fire on every cylinder
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.