VOLVO
ECM-366C - Ignition timing control during cold start
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
4 modeleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Co oznacza ten kod błędu?
This code covers ignition timing control during a cold start, when the engine control module asks for the catalytic converter to be heated. If the ignition cannot be controlled as intended, heating is too slow and exhaust emissions can get worse. The cause always lies in another fault in the system, which probably also stops idle control from working, so start with that fault.
Możliwe przyczyny
- Another fault in the system that is stored as its own code
Co możesz zrobić
- 1Read all stored codes and start with the one that belongs to the other fault
- 2Repair that other fault first, then clear this code
- 3Road test the car and check that the code does not come back
- 4If the idle is still uneven after the repair: have a workshop check idle control with diagnostic equipment
Objawy, które możesz zauważyć1
- Malfunction indicator lamp is lit
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.