Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    ECM-4411
    VOLVO

    ECM-4411 - Fuel cut-off valve. Signal faulty. Intermittent fault

    Układ

    Sterownik silnika (ECM)

    Modele Volvo, których dotyczy ten kod błędu

    Dotyczy następujących modeli:

    2 modele

    S40 (1996–2004), V40 (1996–2004)

    Pokaż modele wg rocznika i silnika (2)
    • Volvo S40 (1996–2004)1999–2000Tylko silnik: D4192T2
    • Volvo V40 (1996–2004)1999–2000Tylko silnik: D4192T2

    Co oznacza ten kod błędu?

    The engine control module has found a fault on the signal line to the fuel cut-off valve, and the fault is intermittent, meaning it comes and goes. It can be caused by a short circuit to positive or ground, an open circuit in the wire or a defective injection pump. While the fault is present, EGR control is switched off.

    Możliwe przyczyny

    • Signal wire short-circuited to supply voltage
    • Signal wire short-circuited to ground
    • Open circuit in the signal wire
    • Defective injection pump

    Co możesz zrobić

    1. 1Check the connector of the fuel cut-off valve for contact resistance and oxidation
    2. 2Look for chafed or pinched wiring to the fuel cut-off valve, especially where the signal wire may have touched positive or ground
    3. 3Use a multimeter to check that the signal wire is not open-circuited and has no contact with positive or ground
    4. 4Have a workshop check the injection pump if the wiring is intact
    5. 5Since the fault is intermittent it may come back, so clear the fault code after the repair and test drive the car

    Objawy, które możesz zauważyć3

    • Malfunction indicator lamp (MIL) is on
    • The engine does not start
    • The engine does not stop

    Na co może wpływać usterka1

    • EGR control is switched off

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.