Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    ECM-4412
    VOLVO

    ECM-4412 - Fuel quantity regulation. Signal faulty. Intermittent fault

    Układ

    Sterownik silnika (ECM)

    Modele Volvo, których dotyczy ten kod błędu

    Dotyczy następujących modeli:

    2 modele

    S40 (1996–2004), V40 (1996–2004)

    Pokaż modele wg rocznika i silnika (2)
    • Volvo S40 (1996–2004)1999–2000Tylko silnik: D4192T2
    • Volvo V40 (1996–2004)1999–2000Tylko silnik: D4192T2

    Co oznacza ten kod błędu?

    The engine control module compares the desired fuel quantity with the actual quantity, and the fault code is set when the difference becomes too large. The fault is intermittent, meaning it comes and goes. It can be caused by a short circuit in the signal wire, an open circuit or a defective injection pump, and the fuel supply is then shut off by the fuel shut-off valve.

    Możliwe przyczyny

    • Signal wire short-circuited to supply voltage
    • Signal wire short-circuited to ground
    • Open circuit in the signal wire
    • Defective injection pump

    Co możesz zrobić

    1. 1Check the injection pump connector for contact resistance and oxidation
    2. 2Look for chafed wiring to the injection pump
    3. 3Use a multimeter to check that the signal wire is intact and has no contact with positive or ground
    4. 4Have a workshop check the power supply to the injection pump from the system relay
    5. 5Since the fault is intermittent it may come and go, so clear the fault code after the repair and test drive the car

    Objawy, które możesz zauważyć2

    • Malfunction indicator lamp (MIL) is on
    • The engine does not start

    Na co może wpływać usterka2

    • Fuel supply is shut off by the fuel shut-off valve
    • Fuel regulator is switched off

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.