VOLVO
ECM-5670 - Exhaust temperature. Signal too low
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
8 modeliC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Pokaż modele wg rocznika i silnika (20)
- Volvo C30 (2007–2013)2007Tylko silnik: D5244T8, D5244T9
- Volvo C30 (2007–2013)2008–2010Tylko silnik: D5244T13, D5244T8, D5244T9
- Volvo C70 (2006–2013)2007Tylko silnik: D5244T8, D5244T9
- Volvo C70 (2006–2013)2008–2010Tylko silnik: D5244T13, D5244T8, D5244T9
- Volvo S40 (2004–2013)2006Tylko silnik: D5244T8
- Volvo S40 (2004–2013)2007Tylko silnik: D5244T8, D5244T9
- Volvo S40 (2004–2013)2008–2010Tylko silnik: D5244T13, D5244T8, D5244T9
- Volvo S60 (2001–2009)2006Tylko silnik: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo S60 (2001–2009)2007–2009Tylko silnik: D5244T4, D5244T5, D5244T7
- Volvo V50 (2004–2013)2006Tylko silnik: D5244T8
- Volvo V50 (2004–2013)2007Tylko silnik: D5244T8, D5244T9
- Volvo V50 (2004–2013)2008–2010Tylko silnik: D5244T13, D5244T8, D5244T9
- Volvo V70 (2000–2008)2006Tylko silnik: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo V70 (2000–2008)2007Tylko silnik: D5244T4, D5244T5, D5244T7
- Volvo V70 (2000–2008)2008Tylko silnik: D5244T5, D5244T7
- Volvo V70 XC / XC70 (2001–2007)2006–2007Tylko silnik: D5244T4
- Volvo XC90 (2003–)2006–2007Tylko silnik: D5244T4
- Volvo XC90 (2003–)2008–2010Tylko silnik: D5244T4, D5244T5
- Volvo XC90 (2003–)2011Tylko silnik: D5244T18, D5244T4, D5244T5
- Volvo XC90 (2003–)2012Wszystkie silniki oprócz: B5254T2, B6324S5
Co oznacza ten kod błędu?
The engine control module (ECM) monitors the exhaust gas temperature and compares it with a calculated value. The code is set when the temperature deviates too far. Although the code is named signal too low, the cause can also be a signal that is too high from a damaged sensor. A message is shown in the text display.
Możliwe przyczyny
- Damaged exhaust temperature sensor
- Raised contact resistance or oxidation in the connector terminals
Co możesz zrobić
- 1Check that the connectors at the exhaust temperature sensors for the catalytic converter and the particulate filter are fully seated and free from oxidation
- 2Check that the wiring to the sensors is not chafed or broken
- 3If you have a diagnostic tool, read the exhaust temperatures in live data with the engine running and see whether any differs strongly from what you would expect
- 4If the fault remains, have a workshop check the sensors and replace the damaged one
Objawy, które możesz zauważyć1
- A message is shown in the text display
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.