VOLVO
ECM-5850 - Configuration fault. Faulty signal
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
8 modeliC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Pokaż modele wg rocznika i silnika (23)
- Volvo C30 (2007–2013)2007Tylko silnik: D4164T, D5244T8, D5244T9
- Volvo C30 (2007–2013)2008–2010Tylko silnik: D4164T, D5244T13, D5244T8, D5244T9
- Volvo C30 (2007–2013)2011Tylko silnik: D4164T
- Volvo C70 (2006–2013)2007Tylko silnik: D5244T8, D5244T9
- Volvo C70 (2006–2013)2008–2010Tylko silnik: D5244T13, D5244T8, D5244T9
- Volvo S40 (2004–2013)2005, 2011Tylko silnik: D4164T
- Volvo S40 (2004–2013)2006Tylko silnik: D4164T, D5244T8
- Volvo S40 (2004–2013)2007Tylko silnik: D4164T, D5244T8, D5244T9
- Volvo S40 (2004–2013)2008–2010Tylko silnik: D4164T, D5244T13, D5244T8, D5244T9
- Volvo S60 (2001–2009)2006Tylko silnik: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo S60 (2001–2009)2007–2009Tylko silnik: D5244T4, D5244T5, D5244T7
- Volvo V50 (2004–2013)2005, 2011Tylko silnik: D4164T
- Volvo V50 (2004–2013)2006Tylko silnik: D4164T, D5244T8
- Volvo V50 (2004–2013)2007Tylko silnik: D4164T, D5244T8, D5244T9
- Volvo V50 (2004–2013)2008–2010Tylko silnik: D4164T, D5244T13, D5244T8, D5244T9
- Volvo V70 (2000–2008)2006Tylko silnik: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo V70 (2000–2008)2007Tylko silnik: D5244T4, D5244T5, D5244T7
- Volvo V70 (2000–2008)2008Tylko silnik: D5244T5, D5244T7
- Volvo V70 XC / XC70 (2001–2007)2006–2007Tylko silnik: D5244T4
- Volvo XC90 (2003–)2006–2007Tylko silnik: D5244T4
- Volvo XC90 (2003–)2008–2010Tylko silnik: D5244T4, D5244T5
- Volvo XC90 (2003–)2011Tylko silnik: D5244T18, D5244T4, D5244T5
- Volvo XC90 (2003–)2012Wszystkie silniki oprócz: B5254T2, B6324S5
Co oznacza ten kod błędu?
The engine control module (ECM) receives the car's configuration data from the central electronic module (CEM) over CAN. The code is set when that data cannot be stored correctly in the engine module. The driver normally does not notice the fault, and the cause may lie in the CAN network, in the connectors, or in a CEM that does not suit the car.
Możliwe przyczyny
- CAN-related fault codes in the CEM
- Play, raised contact resistance or oxidation in the connections
- Break in the CAN wiring to the CEM
- Internal fault in the module itself
- A CEM not intended for the car, for example a used module with other software or hardware
Co możesz zrobić
- 1Read the CAN-related codes in the CEM and fix them first
- 2Check the connectors in the CAN network and look for breaks or chafing in the wiring
- 3If the car has a used CEM fitted, have a workshop check that it is intended for this particular car
- 4Clear the code only once the causes are fixed, then road test to see whether it returns
Objawy, które możesz zauważyć1
- No noticeable symptoms for the driver
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.