VOLVO
ECM-586F - Configuration fault. Faulty signal
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
8 modeliC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Pokaż modele wg rocznika i silnika (23)
- Volvo C30 (2007–2013)2007Tylko silnik: D4164T, D5244T8, D5244T9
- Volvo C30 (2007–2013)2008–2010Tylko silnik: D4164T, D5244T13, D5244T8, D5244T9
- Volvo C30 (2007–2013)2011Tylko silnik: D4164T
- Volvo C70 (2006–2013)2007Tylko silnik: D5244T8, D5244T9
- Volvo C70 (2006–2013)2008–2010Tylko silnik: D5244T13, D5244T8, D5244T9
- Volvo S40 (2004–2013)2005, 2011Tylko silnik: D4164T
- Volvo S40 (2004–2013)2006Tylko silnik: D4164T, D5244T8
- Volvo S40 (2004–2013)2007Tylko silnik: D4164T, D5244T8, D5244T9
- Volvo S40 (2004–2013)2008–2010Tylko silnik: D4164T, D5244T13, D5244T8, D5244T9
- Volvo S60 (2001–2009)2006Tylko silnik: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo S60 (2001–2009)2007–2009Tylko silnik: D5244T4, D5244T5, D5244T7
- Volvo V50 (2004–2013)2005, 2011Tylko silnik: D4164T
- Volvo V50 (2004–2013)2006Tylko silnik: D4164T, D5244T8
- Volvo V50 (2004–2013)2007Tylko silnik: D4164T, D5244T8, D5244T9
- Volvo V50 (2004–2013)2008–2010Tylko silnik: D4164T, D5244T13, D5244T8, D5244T9
- Volvo V70 (2000–2008)2006Tylko silnik: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo V70 (2000–2008)2007Tylko silnik: D5244T4, D5244T5, D5244T7
- Volvo V70 (2000–2008)2008Tylko silnik: D5244T5, D5244T7
- Volvo V70 XC / XC70 (2001–2007)2006–2007Tylko silnik: D5244T4
- Volvo XC90 (2003–)2006–2007Tylko silnik: D5244T4
- Volvo XC90 (2003–)2008–2010Tylko silnik: D5244T4, D5244T5
- Volvo XC90 (2003–)2011Tylko silnik: D5244T18, D5244T4, D5244T5
- Volvo XC90 (2003–)2012Wszystkie silniki oprócz: B5254T2, B6324S5
Co oznacza ten kod błędu?
This code means the engine control module (ECM) has not received the configuration that belongs to the car. That happens when the module has not been programmed, when programming has failed, or when a module with the wrong software has been fitted. Engine torque may then be limited.
Możliwe przyczyny
- Engine control module has not been programmed
- Software in the engine module does not match the car's configuration
- Programming of the engine control module has failed
- A module with the wrong software has been fitted to the car
Co możesz zrobić
- 1Have a workshop check that the latest software for the engine control module is loaded in the car, and reload it if needed
- 2If the engine control module has been replaced, have a workshop check that it carries the right software for the car
- 3Clear the code only once the software is correct, then road test to see whether it returns
Objawy, które możesz zauważyć1
- No noticeable symptoms for the driver
Na co może wpływać usterka1
- Engine torque may be limited
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.