ECM-603D
VOLVO
ECM-603D - Turbocharger (TC) control system. Signal too low
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
4 modeleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Pokaż modele wg rocznika i silnika (9)
- Volvo C30 (2007–2013)2007Tylko silnik: B5254T3
- Volvo C30 (2007–2013)2008–2013Tylko silnik: B5254T7
- Volvo C70 (2006–2013)2006–2007Tylko silnik: B5254T3
- Volvo C70 (2006–2013)2008–2013Tylko silnik: B5254T7
- Volvo S40 (2004–2013)2005–2007Tylko silnik: B5254T3
- Volvo S40 (2004–2013)2008Tylko silnik: B5254T3, B5254T7
- Volvo S40 (2004–2013)2009–2012Tylko silnik: B5254T7
- Volvo V50 (2004–2013)2005–2007Tylko silnik: B5254T3
- Volvo V50 (2004–2013)2008–2012Tylko silnik: B5254T7
Co oznacza ten kod błędu?
The engine control module (ECM) compares the measured boost pressure with its target value. If the boost pressure becomes lower than the target, a fault is registered. The cause may lie in the valve, the hoses or the charge air cooler, or in the wastegate valve and its pressure servo.
Możliwe przyczyny
- Damaged turbocharger control valve
- Damaged charge air cooler
- One hose from the wastegate valve servo to the turbo control valve has worked loose, or is clogged or cracked
- Hoses between the turbocharger control valve and the charge air pipe are blocked or damaged
- Incorrectly adjusted or damaged pressure servo on the wastegate valve
- Sticking wastegate valve
Co możesz zrobić
- 1Check that the hose between the wastegate valve pressure servo and the turbocharger control valve is correctly fitted and not damaged or blocked
- 2Check that the hose running from the charge air pipe to the turbo control valve is fitted correctly and is neither damaged nor clogged
- 3Check that the charge air cooler is not blocked
- 4With a diagnostic tool: activate the turbocharger control valve and check that it clicks. A damaged valve can be hard to detect that way
- 5Check that the wastegate valve moves freely and is not sticking. Setting the pressure servo is a job for a workshop
Objawy, które możesz zauważyć1
- Poor performance
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.