VOLVO
ECM-6200 - Alternator. Signal missing
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Ten kod błędu ma różne znaczenie w zależności od modelu, rocznika lub silnika. Wybierz znaczenie, które dotyczy Twojego samochodu.
Dotyczy następujących modeli:
8 modeliC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Pokaż modele wg rocznika i silnika (20)
- Volvo C30 (2007–2013)2007Tylko silnik: D5244T8, D5244T9
- Volvo C30 (2007–2013)2008–2010Tylko silnik: D5244T13, D5244T8, D5244T9
- Volvo C70 (2006–2013)2007Tylko silnik: D5244T8, D5244T9
- Volvo C70 (2006–2013)2008–2010Tylko silnik: D5244T13, D5244T8, D5244T9
- Volvo S40 (2004–2013)2006Tylko silnik: D5244T8
- Volvo S40 (2004–2013)2007Tylko silnik: D5244T8, D5244T9
- Volvo S40 (2004–2013)2008–2010Tylko silnik: D5244T13, D5244T8, D5244T9
- Volvo S60 (2001–2009)2006Tylko silnik: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo S60 (2001–2009)2007–2009Tylko silnik: D5244T4, D5244T5, D5244T7
- Volvo V50 (2004–2013)2006Tylko silnik: D5244T8
- Volvo V50 (2004–2013)2007Tylko silnik: D5244T8, D5244T9
- Volvo V50 (2004–2013)2008–2010Tylko silnik: D5244T13, D5244T8, D5244T9
- Volvo V70 (2000–2008)2006Tylko silnik: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo V70 (2000–2008)2007Tylko silnik: D5244T4, D5244T5, D5244T7
- Volvo V70 (2000–2008)2008Tylko silnik: D5244T5, D5244T7
- Volvo V70 XC / XC70 (2001–2007)2006–2007Tylko silnik: D5244T4
- Volvo XC90 (2003–)2006–2007Tylko silnik: D5244T4
- Volvo XC90 (2003–)2008–2010Tylko silnik: D5244T4, D5244T5
- Volvo XC90 (2003–)2011Tylko silnik: D5244T18, D5244T4, D5244T5
- Volvo XC90 (2003–)2012Wszystkie silniki oprócz: B5254T2, B6324S5
Co oznacza ten kod błędu?
The engine control module (ECM) and the alternator control module (ACM) communicate with each other over a signal cable. The code is set when the ECM receives word of an alternator fault or when communication between the modules breaks down. The battery can then discharge, because the alternator is not charging properly.
Możliwe przyczyny
- Open circuit in the link between the two control modules
- Contact resistance or oxidation in the connectors
- Worn carbon brushes in the alternator
- Damaged alternator control module (ACM)
- Damaged auxiliary drive belt or belt tensioner
- An alternator not built for LIN communication has been fitted
Co możesz zrobić
- 1If the alternator has recently been replaced, check that it is intended for this car and for communication with the control modules
- 2Check that the alternator drive belt is correctly fitted, not worn, and that the belt tensioner works
- 3Check that the connector to the alternator control module is firmly seated and free from contact resistance and oxidation
- 4Use a multimeter to check the signal cable for breaks and for short circuits to ground or voltage
- 5With a diagnostic tool: start the engine and read the alternator charging current in live data
Objawy, które możesz zauważyć3
- Message in the information display
- The battery discharges
- The alternator warning lamp is lit with the engine running
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.