Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    ECM-673D
    VOLVO

    ECM-673D - Camshaft position, exhaust. Low

    Układ

    Sterownik silnika (ECM)

    Modele Volvo, których dotyczy ten kod błędu

    Dotyczy następujących modeli:

    4 modele

    C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

    Pokaż modele wg rocznika i silnika (9)
    • Volvo C30 (2007–2013)2007Tylko silnik: B5254T3
    • Volvo C30 (2007–2013)2008–2013Tylko silnik: B5254T7
    • Volvo C70 (2006–2013)2006–2007Tylko silnik: B5254T3
    • Volvo C70 (2006–2013)2008–2013Tylko silnik: B5254T7
    • Volvo S40 (2004–2013)2005–2007Tylko silnik: B5254T3
    • Volvo S40 (2004–2013)2008Tylko silnik: B5254T3, B5254T7
    • Volvo S40 (2004–2013)2009–2012Tylko silnik: B5254T7
    • Volvo V50 (2004–2013)2005–2007Tylko silnik: B5254T3
    • Volvo V50 (2004–2013)2008–2012Tylko silnik: B5254T7

    Co oznacza ten kod błędu?

    The engine control module adjusts the angle of the exhaust camshaft through adaptation when it sits too far behind, after the crankshaft. The fault code is stored when the adaptation value falls below a certain level.

    Możliwe przyczyny

    • Poor engine oil quality
    • Incorrectly adjusted camshafts
    • The timing belt has jumped over the teeth

    Co możesz zrobić

    1. 1Check that the engine oil is at the right level, of the right grade and clean
    2. 2Have a workshop check the engine oil pressure, since it affects the VVT control
    3. 3Have a workshop clean the reset valve and the oil passages in the cylinder head, and replace the valve if it is defective
    4. 4Replace the reset valve if it cannot be cleaned or if the fault remains after cleaning
    5. 5If everything else has been checked and the fault remains, the VVT unit may be defective, which a workshop will decide

    Objawy, które możesz zauważyć4

    • The “Check engine” lamp lights or behaves abnormally
    • The engine is hard to start and cranks slowly
    • Lack of power and poor performance
    • Hesitation or jerky running

    Na co może wpływać usterka1

    • Camshaft control for the exhaust is switched off

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.