VOLVO
ECM-7510 - Engine speed (RPM) signal. Faulty signal
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
8 modeliC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Pokaż modele wg rocznika i silnika (23)
- Volvo C30 (2007–2013)2007Tylko silnik: D4164T, D5244T8, D5244T9
- Volvo C30 (2007–2013)2008–2010Tylko silnik: D4164T, D5244T13, D5244T8, D5244T9
- Volvo C30 (2007–2013)2011Tylko silnik: D4164T
- Volvo C70 (2006–2013)2007Tylko silnik: D5244T8, D5244T9
- Volvo C70 (2006–2013)2008–2010Tylko silnik: D5244T13, D5244T8, D5244T9
- Volvo S40 (2004–2013)2005, 2011Tylko silnik: D4164T
- Volvo S40 (2004–2013)2006Tylko silnik: D4164T, D5244T8
- Volvo S40 (2004–2013)2007Tylko silnik: D4164T, D5244T8, D5244T9
- Volvo S40 (2004–2013)2008–2010Tylko silnik: D4164T, D5244T13, D5244T8, D5244T9
- Volvo S60 (2001–2009)2006Tylko silnik: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo S60 (2001–2009)2007–2009Tylko silnik: D5244T4, D5244T5, D5244T7
- Volvo V50 (2004–2013)2005, 2011Tylko silnik: D4164T
- Volvo V50 (2004–2013)2006Tylko silnik: D4164T, D5244T8
- Volvo V50 (2004–2013)2007Tylko silnik: D4164T, D5244T8, D5244T9
- Volvo V50 (2004–2013)2008–2010Tylko silnik: D4164T, D5244T13, D5244T8, D5244T9
- Volvo V70 (2000–2008)2006Tylko silnik: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo V70 (2000–2008)2007Tylko silnik: D5244T4, D5244T5, D5244T7
- Volvo V70 (2000–2008)2008Tylko silnik: D5244T5, D5244T7
- Volvo V70 XC / XC70 (2001–2007)2006–2007Tylko silnik: D5244T4
- Volvo XC90 (2003–)2006–2007Tylko silnik: D5244T4
- Volvo XC90 (2003–)2008–2010Tylko silnik: D5244T4, D5244T5
- Volvo XC90 (2003–)2011Tylko silnik: D5244T18, D5244T4, D5244T5
- Volvo XC90 (2003–)2012Wszystkie silniki oprócz: B5254T2, B6324S5
Co oznacza ten kod błędu?
The engine control module (ECM) monitors the engine speed signal and has registered that it is faulty. The fault may be due to poor connections or open wiring to the engine speed (RPM) sensor or the camshaft sensor, but also to a damaged sensor. The fault applies to the C30, C70 (06-), S40 (04-), S60 (-09), V50, V70, V70 XC and XC90.
Możliwe przyczyny
- Contact resistance in the connectors or an open circuit in the wiring to the engine speed (RPM) sensor
- Contact resistance in the connectors or an open circuit in the wiring to the camshaft sensor
- Damaged engine speed (RPM) sensor
- Damaged camshaft sensor
- Internal fault in the engine control module
Co możesz zrobić
- 1Read the code, note it, clear it and road test the car to see whether it comes back
- 2Check that the connectors to the engine speed sensor and the camshaft sensor are secure and free from corrosion
- 3Check the wiring between the sensors and the engine control module for breaks and chafing
- 4If you have a diagnostic tool: compare the engine speed value in live data with the camshaft sensor value and check that they follow each other
- 5If the fault remains, have a workshop with diagnostic equipment check the sensors and the engine control module
Objawy, które możesz zauważyć2
- Reduced engine performance
- The engine hesitates, surges or runs unevenly at a steady speed
Na co może wpływać usterka1
- Engine output may be limited
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.