VOLVO
ECM-880F - Ignition switch. Signal missing
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
8 modeliC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Pokaż modele wg rocznika i silnika (23)
- Volvo C30 (2007–2013)2007Tylko silnik: D4164T, D5244T8, D5244T9
- Volvo C30 (2007–2013)2008–2010Tylko silnik: D4164T, D5244T13, D5244T8, D5244T9
- Volvo C30 (2007–2013)2011Tylko silnik: D4164T
- Volvo C70 (2006–2013)2007Tylko silnik: D5244T8, D5244T9
- Volvo C70 (2006–2013)2008–2010Tylko silnik: D5244T13, D5244T8, D5244T9
- Volvo S40 (2004–2013)2005, 2011Tylko silnik: D4164T
- Volvo S40 (2004–2013)2006Tylko silnik: D4164T, D5244T8
- Volvo S40 (2004–2013)2007Tylko silnik: D4164T, D5244T8, D5244T9
- Volvo S40 (2004–2013)2008–2010Tylko silnik: D4164T, D5244T13, D5244T8, D5244T9
- Volvo S60 (2001–2009)2006Tylko silnik: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo S60 (2001–2009)2007–2009Tylko silnik: D5244T4, D5244T5, D5244T7
- Volvo V50 (2004–2013)2005, 2011Tylko silnik: D4164T
- Volvo V50 (2004–2013)2006Tylko silnik: D4164T, D5244T8
- Volvo V50 (2004–2013)2007Tylko silnik: D4164T, D5244T8, D5244T9
- Volvo V50 (2004–2013)2008–2010Tylko silnik: D4164T, D5244T13, D5244T8, D5244T9
- Volvo V70 (2000–2008)2006Tylko silnik: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo V70 (2000–2008)2007Tylko silnik: D5244T4, D5244T5, D5244T7
- Volvo V70 (2000–2008)2008Tylko silnik: D5244T5, D5244T7
- Volvo V70 XC / XC70 (2001–2007)2006–2007Tylko silnik: D5244T4
- Volvo XC90 (2003–)2006–2007Tylko silnik: D5244T4
- Volvo XC90 (2003–)2008–2010Tylko silnik: D5244T4, D5244T5
- Volvo XC90 (2003–)2011Tylko silnik: D5244T18, D5244T4, D5244T5
- Volvo XC90 (2003–)2012Wszystkie silniki oprócz: B5254T2, B6324S5
Co oznacza ten kod błędu?
The engine control module (ECM) is meant to receive 15 supply, meaning voltage from the ignition, through the system relay and the central electronic module (CEM). The code is set when the control module cannot register that supply at start, or when the supply is missing. The fault may be poor contact, a fault in the system relay or an open circuit in the supply wire.
Możliwe przyczyny
- Loose connection, contact resistance or oxidation in the connections
- System relay fault
- Open circuit in the voltage supply wire
Co możesz zrobić
- 1Read the code, clear it and check whether it returns when the ignition is switched on
- 2With the ignition on, check that battery voltage reaches the control module; use a multimeter between the supply and ground
- 3Check the control module connector for contact resistance, loose fit and oxidation
- 4Check the voltage supply wire for an open circuit with a multimeter
- 5If the fault remains after these checks, have a workshop check the system relay and the central electronic module
Objawy, które możesz zauważyć2
- The engine does not start
- A message appears in the text display
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.