VOLVO
ECM-90A2 - Crash signal
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
3 modeleC30 (2007–2013), S40 (2004–2013), V50 (2004–2013)
Pokaż modele wg rocznika i silnika (9)
- Volvo C30 (2007–2013)2008–2009Tylko silnik: B4184S11, B4184S8, B4204S3
- Volvo C30 (2007–2013)2010Tylko silnik: B4184S11, B4184S8, B4204S3, B4204S4
- Volvo C30 (2007–2013)2011–2013Tylko silnik: B4204S3, B4204S4
- Volvo S40 (2004–2013)2008–2009Tylko silnik: B4184S11, B4184S8, B4204S3
- Volvo S40 (2004–2013)2010Tylko silnik: B4184S11, B4184S8, B4204S3, B4204S4
- Volvo S40 (2004–2013)2011–2012Tylko silnik: B4204S3, B4204S4
- Volvo V50 (2004–2013)2008–2009Tylko silnik: B4184S11, B4184S8, B4204S3
- Volvo V50 (2004–2013)2010Tylko silnik: B4184S11, B4184S8, B4204S3, B4204S4
- Volvo V50 (2004–2013)2011–2012Tylko silnik: B4204S3, B4204S4
Co oznacza ten kod błędu?
The engine control module (ECM) registers internally whether the car has been in a collision. The code is set when the control module receives signals that a collision has occurred, and The fault can only be detected once the test has started and the conditions are met.
Możliwe przyczyny
- No specific causes are given for this code
Co możesz zrobić
- 1Check that the fuses are intact; their locations are in the instruction book or on the fuse box cover
- 2Check the relevant functions of the car with the buttons, controls and a road test to see whether anything behaves abnormally
- 3If none of the symptoms are present, the fault may not be present at the moment, so the check may need to be repeated later
- 4If you have diagnostic equipment, read the code status and the relevant parameters in live data
- 5Because this code concerns the crash signal, do not work on the crash safety system yourself; have a workshop check it if the code remains
Objawy, które możesz zauważyć1
- The engine does not start
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.