VOLVO
ECM-931C - Clutch pedal switch. Faulty signal
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
4 modeleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Pokaż modele wg rocznika i silnika (5)
Co oznacza ten kod błędu?
The ECM compares the signal from the clutch pedal switch, which comes to it directly, with the clutch pedal position that the CEM sends over the CAN network from the clutch pedal sensor. The code is set at ignition on if the two do not agree, and it can also be set if the clutch pedal sensor is damaged.
Możliwe przyczyny
- Damaged clutch pedal switch
- Damaged cable harness
- Damaged clutch position sensor
Co możesz zrobić
- 1Read the fault codes. If ECM-930C is stored in the ECM, deal with that code first, as it can lead to this one
- 2Check that the fuses are intact. Their locations are in the handbook or on the fuse box cover
- 3If you have a diagnostic tool and the car is from mid-November 2007 or later: with the ignition on, read the clutch switch status and press the clutch fully down
- 4Check the connectors and wiring to the clutch pedal switch and the sensor: are they secure, and is there oxidation, play or chafed wiring
- 5If the fault remains after this, have a workshop with diagnostic equipment decide whether the clutch pedal switch or the sensor is damaged
Objawy, które możesz zauważyć1
- Autostart does not work
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.