Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    ECM-9400
    VOLVO

    ECM-9400 - Brake pedal sensor. Signal too low

    Układ

    Sterownik silnika (ECM)

    Modele Volvo, których dotyczy ten kod błędu

    Ten kod błędu ma różne znaczenie w zależności od modelu, rocznika lub silnika. Wybierz znaczenie, które dotyczy Twojego samochodu.

    Dotyczy następujących modeli:

    7 modeli

    C70 Cabriolet (1998–2005), C70 Coupé (1998–2002), S60 (2001–2009), S70 (1997–2000), S80 (1999–2006), V70 (1997–2000), V70 (2000–2008)

    Pokaż modele wg rocznika i silnika (11)
    • Volvo C70 Cabriolet (1998–2005)2000Tylko silnik: B5244S
    • Volvo C70 Coupé (1998–2002)1999Tylko silnik: B5254S DENSO
    • Volvo C70 Coupé (1998–2002)2000Tylko silnik: B5244S
    • Volvo S60 (2001–2009)2001Tylko silnik: B5244S, B5244S2
    • Volvo S70 (1997–2000)1999Tylko silnik: B5254S DENSO
    • Volvo S70 (1997–2000)2000Tylko silnik: B5244S, B5244S2, B5244SG, B5244SG2
    • Volvo S80 (1999–2006)1999–2000Tylko silnik: B5244S, B5244S2
    • Volvo S80 (1999–2006)2001Tylko silnik: B5244S, B5244S2, B5244SG
    • Volvo V70 (1997–2000)1999Tylko silnik: B5254S DENSO
    • Volvo V70 (1997–2000)2000Tylko silnik: B5244S, B5244S2, B5244SG, B5244SG2
    • Volvo V70 (2000–2008)2001Tylko silnik: B5244S, B5244S2, B5244SG

    Co oznacza ten kod błędu?

    The code means the brake pedal position sensor signal is too low. On cars of model year 1999 to 2001 the signal is measured directly at the sensor. On model year 2002 the ECM instead takes the brake pedal position from the brake control module (BCM) over the CAN network. The brake pedal sensor belongs to the brake system, so the fault should be dealt with.

    Możliwe przyczyny

    • Signal cable short-circuited to ground
    • On model year 2002: a fault in the CAN communication between the BCM and the ECM

    Co możesz zrobić

    1. 1Read the fault codes in the brake control module (BCM) and in the ECM. If the BCM has codes that point to the brake pedal sensor, deal with those first
    2. 2If you have a diagnostic tool: read the fault status. It shows whether the fault is permanent or intermittent, and whether other codes are stored
    3. 3Use a multimeter to check that the signal cable from the sensor is not shorted to ground (body). Check the wiring and connectors: are they secure, and is there oxidation
    4. 4The brake system is safety-critical. If the fault remains, have a workshop check it, and do not drive with a safety fault in the brakes

    Objawy, które możesz zauważyć2

    • Electronic throttle system (ETS) warning lamp lights
    • Cruise control does not function at all

    Na co może wpływać usterka2

    • Cruise control is off for the driving cycle in which the fault was detected
    • At the next start the function is available, if the fault is no longer present

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.