VOLVO
ECM-A02F - Vehicle speed signal (VSS). Faulty signal
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
8 modeliC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Pokaż modele wg rocznika i silnika (23)
- Volvo C30 (2007–2013)2007Tylko silnik: D4164T, D5244T8, D5244T9
- Volvo C30 (2007–2013)2008–2010Tylko silnik: D4164T, D5244T13, D5244T8, D5244T9
- Volvo C30 (2007–2013)2011Tylko silnik: D4164T
- Volvo C70 (2006–2013)2007Tylko silnik: D5244T8, D5244T9
- Volvo C70 (2006–2013)2008–2010Tylko silnik: D5244T13, D5244T8, D5244T9
- Volvo S40 (2004–2013)2005, 2011Tylko silnik: D4164T
- Volvo S40 (2004–2013)2006Tylko silnik: D4164T, D5244T8
- Volvo S40 (2004–2013)2007Tylko silnik: D4164T, D5244T8, D5244T9
- Volvo S40 (2004–2013)2008–2010Tylko silnik: D4164T, D5244T13, D5244T8, D5244T9
- Volvo S60 (2001–2009)2006Tylko silnik: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo S60 (2001–2009)2007–2009Tylko silnik: D5244T4, D5244T5, D5244T7
- Volvo V50 (2004–2013)2005, 2011Tylko silnik: D4164T
- Volvo V50 (2004–2013)2006Tylko silnik: D4164T, D5244T8
- Volvo V50 (2004–2013)2007Tylko silnik: D4164T, D5244T8, D5244T9
- Volvo V50 (2004–2013)2008–2010Tylko silnik: D4164T, D5244T13, D5244T8, D5244T9
- Volvo V70 (2000–2008)2006Tylko silnik: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo V70 (2000–2008)2007Tylko silnik: D5244T4, D5244T5, D5244T7
- Volvo V70 (2000–2008)2008Tylko silnik: D5244T5, D5244T7
- Volvo V70 XC / XC70 (2001–2007)2006–2007Tylko silnik: D5244T4
- Volvo XC90 (2003–)2006–2007Tylko silnik: D5244T4
- Volvo XC90 (2003–)2008–2010Tylko silnik: D5244T4, D5244T5
- Volvo XC90 (2003–)2011Tylko silnik: D5244T18, D5244T4, D5244T5
- Volvo XC90 (2003–)2012Wszystkie silniki oprócz: B5254T2, B6324S5
Co oznacza ten kod błędu?
Although the code is named vehicle speed signal, it concerns the CAN link between the BCM and the ECM. If that communication is disturbed or stops, the code is set, and automatic engine start and stop then does not work. The fault may sit in the brake control module or in the CAN-related communication.
Możliwe przyczyny
- A fault in the brake control module (BCM)
- A problem with the CAN communication between the brake control module and the engine control module
Co możesz zrobić
- 1Read the fault codes in the BCM first, then in the CEM
- 2Fault-trace and remedy the faults in the brake control module and the CAN-related codes in the CEM first; this code cannot be cleared until they have been remedied and cleared
- 3Check the connectors and wiring harness of the CAN network for open circuits and chafing
- 4Do not work on the braking system yourself; have a workshop check the brake control module, since the fault belongs to it
- 5After the repair, clear the code and road test the car to see whether it returns
Objawy, które możesz zauważyć3
- Automatic engine start and stop does not work while driving
- Automatic engine start and stop does not work at idle
- Autostart does not work
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.