VOLVO
ECM-B102486 - Start control unit. Bus Signal / Message Failures. Signal invalid
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
10 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Pokaż modele wg rocznika i silnika (39)
- Volvo S60 (2011–)2011–2012Tylko silnik: B6304T4
- Volvo S60 (2011–)2013Tylko silnik: B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
- Volvo S60 (2011–)2014Wszystkie silniki oprócz: B4164T, B4164T2, B4164T3, B4204T7, D4162T, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S60 (2011–)2015Wszystkie silniki oprócz: B4164T, B4164T2, B4164T3, D4162T, D5204T3, D5204T7, D5244T11, D5244T15, D5244T23
- Volvo S80 (2007–)2007Tylko silnik: B6324S, B8444S
- Volvo S80 (2007–)2008–2009Tylko silnik: B6304T2, B6324S, B8444S
- Volvo S80 (2007–)2010Tylko silnik: B6304T2, B6324S, B6324S2, B8444S
- Volvo S80 (2007–)2011Tylko silnik: B6304T4, B6324S4, B6324S5, B8444S
- Volvo S80 (2007–)2012Tylko silnik: B6304T4, B6324S4, B6324S5
- Volvo S80 (2007–)2013Tylko silnik: B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
- Volvo S80 (2007–)2014Tylko silnik: B4204T11, B4204T12, B4204T15, B5254T12, B5254T14, B6304T4, B6324S4, B6324S5, D4204T5
- Volvo S80 (2007–)2015Wszystkie silniki oprócz: B4164T, D4162T, D5204T3, D5244T15
- Volvo V40 (2013–)2013–2014Tylko silnik: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 (2013–)2015Tylko silnik: B4204T11, B5204T8, B5204T9, D4204T14
- Volvo V40 Cross Country (2013–)2013–2014Tylko silnik: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 Cross Country (2013–)2015Wszystkie silniki oprócz: B4164T, D4162T, D5204T6
- Volvo V60 (2011–)2011–2012Tylko silnik: B6304T4
- Volvo V60 (2011–)2013Tylko silnik: B5204T8, B5204T9, B6304T4
- Volvo V60 (2011–)2014Tylko silnik: B4204T11, B4204T12, B4204T15, B4204T9, B5204T8, B5204T9, B5254T12, B6304T4, D4204T5
- Volvo V60 (2011–)2015Tylko silnik: B4204T11, B4204T12, B4204T15, B4204T9, B5204T9, B5254T12, B6304T3, B6304T4, B6304T5, D4204T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2009Tylko silnik: B6304T2, B6324S
- Volvo V70 (2008–)2010Tylko silnik: B6304T2, B6324S, B6324S2
- Volvo V70 (2008–)2011–2012Tylko silnik: B6304T4, B6324S5
- Volvo V70 (2008–)2013Tylko silnik: B5204T9, B6304T4, B6324S5
- Volvo V70 (2008–)2014Tylko silnik: B4204T11, B5204T9, B6304T4, B6324S5, D4204T5
- Volvo V70 (2008–)2015Tylko silnik: B4204T11, B5204T9, B6304T4, D4204T5
- Volvo XC60 (2009–)2009Tylko silnik: B6304T2
- Volvo XC60 (2009–)2010Tylko silnik: B6304T2, B6324S, B6324S2
- Volvo XC60 (2009–)2011–2013Tylko silnik: B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2014Wszystkie silniki oprócz: B4204T7, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo XC60 (2009–)2015Wszystkie silniki oprócz: B4204T7, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
- Volvo XC70 (2008–)2008Tylko silnik: B6324S
- Volvo XC70 (2008–)2009Tylko silnik: B6304T2, B6324S
- Volvo XC70 (2008–)2010Tylko silnik: B6304T2, B6324S, B6324S2
- Volvo XC70 (2008–)2011–2013Tylko silnik: B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2014–2015Tylko silnik: B4204T11, B6304T4, B6324S4, B6324S5, D4204T5
- Volvo XC90 (2003–)2007–2010Tylko silnik: B6324S
- Volvo XC90 (2003–)2011–2014Tylko silnik: B6324S5
Co oznacza ten kod błędu?
The central electronic module (CEM) monitors the signals from the ignition switch control module (SCU). The engine control module checks that both the direct cable signal and the CAN signal are reliable, and the code is set when the CAN signal quality is too low. The check starts when the engine starts, and starting or autostart can then be affected.
Możliwe przyczyny
- Open circuit in the communication cable
- Short circuit to ground in the communication cable
- Short circuit to supply voltage in the communication cable
- Contact resistance or oxidation in the connections
- Open circuit in the connections
- Short circuit in the connections
Co możesz zrobić
- 1Read the fault codes in the central electronic module (CEM) first; this code can be cleared only once the root fault is remedied and its code erased
- 2Check the signal wire between the modules and the connectors for open circuits, short circuits and oxidation
- 3With a multimeter, check whether the communication cable has an open circuit or a short to ground or supply voltage
- 4On XC60 cars built before mid-November 2010 the fault-tracing may differ, so leave the judgement to a workshop
Objawy, które możesz zauważyć3
- Autostart does not occur
- The engine does not start, and it is unpredictable when it does
- Starting and autostart do not work
Na co może wpływać usterka1
- The signal on the direct cable to the engine control module is used
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.