VOLVO
ECM-B10A200 - Crash Input. General Failure Information. No sub type information
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
7 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Pokaż modele wg rocznika i silnika (22)
- Volvo S60 (2011–)2011Tylko silnik: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Tylko silnik: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Tylko silnik: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2008–2009Tylko silnik: B4204S3, B4204S4, D4204T
- Volvo S80 (2007–)2010Tylko silnik: B4204S3, B4204S4, B4204T6, D4204T
- Volvo S80 (2007–)2011Tylko silnik: B4164T, B4204S3, B4204S4, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2014Tylko silnik: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Tylko silnik: B4164T
- Volvo V40 (2013–)2013Tylko silnik: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Tylko silnik: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Tylko silnik: B4164T
- Volvo V60 (2011–)2011Tylko silnik: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Tylko silnik: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Tylko silnik: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2008–2009Tylko silnik: B4204S3, B4204S4, D4204T
- Volvo V70 (2008–)2010Tylko silnik: B4204S3, B4204S4, B4204T6, D4204T
- Volvo V70 (2008–)2011Tylko silnik: B4164T, B4204S3, B4204S4, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Tylko silnik: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Tylko silnik: B4164T, B4164T2
- Volvo XC60 (2009–)2010Tylko silnik: B4204T6
- Volvo XC60 (2009–)2011–2012Tylko silnik: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Tylko silnik: B4204T7
Co oznacza ten kod błędu?
The engine control module records internally whether the car has been in a crash. The code is set when the CEM reports internally that a collision has taken place, and when the engine control module detects a fault in the airbag signal. Engine start is then not permitted, and the code must be cleared like a normal fault code.
Możliwe przyczyny
- The airbag has deployed
- A fault in the central electronic module (CEM)
- A fault in the supplemental restraint system (SRS)
Co możesz zrobić
- 1Read the fault codes in the central electronic module (CEM) first and then in the supplemental restraint system (SRS)
- 2The code can be cleared only once the root fault has been remedied and its code erased
- 3The airbag and the restraint system are safety-critical; do not work on them yourself and have a workshop check them
Objawy, które możesz zauważyć5
- The starter motor turns but the engine does not start
- General warning lamp on
- Message in the display
- The check engine lamp lights or behaves abnormally
- Text window with a warning symbol and text message
Na co może wpływać usterka1
- Engine start is not permitted
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.