VOLVO
ECM-B139F4B - Main Battery Relay. System Internal Failures. Over temperature
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
8 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (29)
- Volvo S60 (2011–)2011Tylko silnik: B4164T, B4164T3
- Volvo S60 (2011–)2012Wszystkie silniki oprócz: B4204T7, B5254T5, B6304T4, D4162T
- Volvo S60 (2011–)2013–2014Tylko silnik: B4164T, B4164T2, B4164T3, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S60 (2011–)2015Tylko silnik: B4164T, B4164T2, B4164T3, D5204T3, D5204T7, D5244T11, D5244T15, D5244T23
- Volvo S80 (2007–)2011Tylko silnik: B4164T
- Volvo S80 (2007–)2012Tylko silnik: B4164T, B4164T2, D5204T3, D5244T11, D5244T15
- Volvo S80 (2007–)2013–2014Tylko silnik: B4164T, B4164T2, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S80 (2007–)2015Tylko silnik: B4164T, D5204T3, D5244T15
- Volvo V40 (2013–)2013Tylko silnik: B4164T, B4164T3, D5204T4, D5204T6
- Volvo V40 (2013–)2014Tylko silnik: B4164T, B4164T3, B4164T4, D5204T4, D5204T6
- Volvo V40 (2013–)2015Tylko silnik: B4164T, B4164T3, B4164T4, D5204T6
- Volvo V40 Cross Country (2013–)2013–2014Tylko silnik: B4164T, D5204T4, D5204T6
- Volvo V40 Cross Country (2013–)2015Tylko silnik: B4164T, D5204T6
- Volvo V60 (2011–)2011Tylko silnik: B4164T, B4164T3
- Volvo V60 (2011–)2012Wszystkie silniki oprócz: B4204T7, B6304T4, D4162T
- Volvo V60 (2011–)2013Wszystkie silniki oprócz: B4204T7, B5204T8, B5204T9, B6304T4, D4162T
- Volvo V60 (2011–)2014Tylko silnik: B4164T, B4164T2, B4164T3, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D82PHEV
- Volvo V60 (2011–)2015Wszystkie silniki oprócz: B4204T11, B4204T12, B4204T15, B4204T9, B5204T9, B5254T12, B6304T3, B6304T4, B6304T5, D4162T, D4204T5
- Volvo V70 (2008–)2011Tylko silnik: B4164T
- Volvo V70 (2008–)2012Tylko silnik: B4164T, B4164T2, D5204T3, D5244T11, D5244T15
- Volvo V70 (2008–)2013Wszystkie silniki oprócz: B4204T7, B5204T9, B6304T4, B6324S5, D4162T
- Volvo V70 (2008–)2014Wszystkie silniki oprócz: B4204T11, B4204T7, B5204T9, B6304T4, B6324S5, D4162T, D4204T5
- Volvo V70 (2008–)2015Wszystkie silniki oprócz: B4204T11, B5204T9, B6304T4, D4162T, D4204T5
- Volvo XC60 (2009–)2012Tylko silnik: D5204T3, D5244T11, D5244T15, D5244T17
- Volvo XC60 (2009–)2013Wszystkie silniki oprócz: B4204T7, B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2014Tylko silnik: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo XC60 (2009–)2015Tylko silnik: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
- Volvo XC70 (2008–)2012–2013Wszystkie silniki oprócz: B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2014–2015Tylko silnik: D5204T3, D5244T11, D5244T12, D5244T15, D5244T17
Co oznacza ten kod błędu?
The engine control module has detected an overload in the main battery relay while controlling it, which can mean that the relay driver stage is getting too hot. The fault is usually intermittent and may be gone when the car is checked. Automatic start/stop is switched off, and the engine may have difficulty starting.
Możliwe przyczyny
- Overload in the connected components
- Loose connection or oxidized connectors
- Short circuit on the connections
- Damaged battery relay
- Mechanical or electrical fault on the relay
- Wiring to the relay is shorted or broken
Co możesz zrobić
- 1Check that the fuses are intact
- 2Check that the battery is charged and that the battery terminals are tight
- 3Check that the connectors at the relay and the engine control module are tight, have no play and are not corroded
- 4Check whether there are other fault codes in the engine control module and fix them first, since this code is often stored together with them
- 5Erase the fault code and road test the car to see whether the fault returns
- 6When no fault can be found outside the module, the driver stage inside the engine control module may be faulty. Have a workshop check it and replace the module if needed
Objawy, które możesz zauważyć2
- Automatic engine start/stop does not work, both while driving and at idle
- The engine does not start, the starter motor does not turn and there is no clicking sound at start attempts
Na co może wpływać usterka2
- The automatic engine start/stop function is switched off
- Starting can be prevented when the relay does not work
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.