Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    ECM-C100
    VOLVO

    ECM-C100 - Communication between control modules. Signal missing

    Układ

    Sterownik silnika (ECM)

    Modele Volvo, których dotyczy ten kod błędu

    Dotyczy następujących modeli:

    4 modele

    C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

    Pokaż modele wg rocznika i silnika (6)
    • Volvo C30 (2007–2013)2007–2010Tylko silnik: D4204T
    • Volvo C70 (2006–2013)2008–2010Tylko silnik: D4204T
    • Volvo S40 (2004–2013)2004–2006Tylko silnik: D4204T, D4204T2
    • Volvo S40 (2004–2013)2007–2010Tylko silnik: D4204T
    • Volvo V50 (2004–2013)2004–2006Tylko silnik: D4204T, D4204T2
    • Volvo V50 (2004–2013)2007–2010Tylko silnik: D4204T

    Co oznacza ten kod błędu?

    The code says that the signal between control modules is missing. The engine control module has registered a serious disturbance on the high speed side of the CAN network, so communication is blocked and the module cannot be reached.

    Możliwe przyczyny

    • Contact resistance or oxidation in the connections
    • Open circuit in one of the CAN wires
    • Short circuit between the CAN wires
    • Internal fault in the engine control module
    • Internal fault in some other control module on the same section of the CAN network

    Co możesz zrobić

    1. 1Start by reading the fault codes from the CEM and the other control modules. There is no specific fault-tracing procedure for this code
    2. 2Check that the fuses are intact and that the battery is connected
    3. 3Check the connectors in the CAN network at the engine control module and the CEM for corrosion and loose contacts
    4. 4Look for breaks and chafing on the CAN wires, especially where they bend or are pinched
    5. 5Erase the fault codes only after the other faults are fixed, then road test the car to see whether the fault returns
    6. 6If the fault remains, have a workshop check the CAN network with diagnostic equipment

    Objawy, które możesz zauważyć2

    • A warning message or warning symbol appears in the display
    • The Check engine warning lamp lights up or behaves abnormally

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.