VOLVO
ECM-C103 - Communication, Transmission Control Module (TCM)
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
4 modeleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Co oznacza ten kod błędu?
The engine control module has registered a communication fault with the transmission control module (TCM), and the fault code is stored in the engine control module. Fault-tracing starts in the transmission control module, because the cause is most often there or in the CAN wiring between them.
Możliwe przyczyny
- The cause lies in the transmission control module (TCM)
- Open circuit in one of the CAN wires
- Short circuit between the CAN wires
- Internal fault in the engine control module
- Internal fault in another control module on the same section of the CAN network
Co możesz zrobić
- 1Start by reading the fault codes from the CEM and the other control modules, and fix them before erasing anything
- 2Check that the battery is charged and that the fuses are intact
- 3Check the connectors at the engine control module and the transmission control module for corrosion and loose contacts
- 4Look for chafing or pinched sections along the CAN wires between the control modules
- 5Erase this fault code only after the other fault codes are fixed, then road test the car to see whether the fault returns
- 6If the fault remains, have a workshop check the transmission control module and the CAN network with diagnostic equipment
Objawy, które możesz zauważyć2
- Harsh gear changes
- The emissions warning lamp is lit
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.