VOLVO
ECM-C104 - Communication between control modules. Signal missing
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
4 modeleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Pokaż modele wg rocznika i silnika (6)
- Volvo C30 (2007–2013)2007–2010Tylko silnik: D4204T
- Volvo C70 (2006–2013)2008–2010Tylko silnik: D4204T
- Volvo S40 (2004–2013)2004–2006Tylko silnik: D4204T, D4204T2
- Volvo S40 (2004–2013)2007–2010Tylko silnik: D4204T
- Volvo V50 (2004–2013)2004–2006Tylko silnik: D4204T, D4204T2
- Volvo V50 (2004–2013)2007–2010Tylko silnik: D4204T
Co oznacza ten kod błędu?
The engine control module watches the CAN links to the CEM and to the steering wheel module (SWM). The fault code is set when the engine control module finds that the link to either of them is not working.
Możliwe przyczyny
- Poor contact or oxidation in a connector, or loose connections
- Open circuit in one of the CAN wires
- Short circuit between the CAN wires
- Internal fault in the engine control module
- Internal fault in some other control module on the same section of the CAN network
Co możesz zrobić
- 1Start by reading the fault codes from the CEM and the other control modules. There is no specific fault-tracing procedure for this code
- 2Check that the fuses are intact and that the battery is connected
- 3Check the connectors at the engine control module, the CEM and the steering wheel module for play and corrosion
- 4Look for chafing and breaks on the CAN wires between the control modules
- 5Erase the fault code only after the other faults are fixed, then road test the car to see whether the fault returns
- 6If the fault remains, have a workshop check the communication with diagnostic equipment
Objawy, które możesz zauważyć2
- A text message and warning symbol appear in the display
- The Check engine warning lamp lights up or behaves abnormally
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.