VOLVO
ECM-C129 - Lost Communication With Brake System Control Module
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
4 modeleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Co oznacza ten kod błędu?
The engine control module has registered that communication with the brake control module is disturbed or missing. The fault can lie in the CAN network or in the brake control module itself, so fault-tracing starts by reading the fault codes in the brake control module.
Możliwe przyczyny
- Disturbances or open circuit on the CAN network
- The cause of the fault lies in the brake control module (BCM)
Co możesz zrobić
- 1Begin by reading the fault codes in the brake control module (BCM) and the CEM. Fix any CAN codes before erasing anything
- 2Check that the fuses are intact and that the battery is charged
- 3Check the connectors at the brake control module and along the CAN wires for loose contacts, corrosion and damage
- 4Look for chafing and pinched sections on the CAN wires
- 5Erase the code after the faults are fixed, then check during a road test that it does not return
- 6This fault concerns the brake control module. If the brakes or ABS feel uncertain, do not drive the car; have a workshop check it
Objawy, które możesz zauważyć1
- No noticeable symptoms for the driver
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.