VOLVO
ECM-CD0A - Battery Monitoring Sensor (BMS). Incorrect hardware
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
3 modeleC30 (2007–2013), S40 (2004–2013), V50 (2004–2013)
Pokaż modele wg rocznika i silnika (3)
Co oznacza ten kod błędu?
The battery monitoring sensor (BMS) has registered a hardware fault. The sensor monitors the battery's condition, and the engine control module uses that information to regulate alternator charging. The fault switches off the automatic start/stop function.
Możliwe przyczyny
- Damaged battery monitoring sensor (BMS)
Co możesz zrobić
- 1Check that the fuses are intact. Their locations are in the owner's manual
- 2Check that the battery is charged and that the battery terminals are tight
- 3If you have a diagnostic tool: read the battery voltage in live data and check that it follows the vehicle's other voltage readings
- 4Check the connector at the battery monitoring sensor for loose contacts and corrosion
- 5Erase the fault code and road test the car with automatic start/stop to see whether it returns
- 6If the fault returns, have a workshop replace the battery monitoring sensor
Objawy, które możesz zauważyć1
- Automatic engine start/stop does not work, both while driving and at idle
Na co może wpływać usterka1
- The automatic engine start/stop function is switched off
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.