VOLVO
ECM-F003 - Battery voltage
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
3 modeleC30 (2007–2013), S40 (2004–2013), V50 (2004–2013)
Pokaż modele wg rocznika i silnika (9)
- Volvo C30 (2007–2013)2008–2009Tylko silnik: B4184S11, B4184S8, B4204S3
- Volvo C30 (2007–2013)2010Tylko silnik: B4184S11, B4184S8, B4204S3, B4204S4
- Volvo C30 (2007–2013)2011–2013Tylko silnik: B4204S3, B4204S4
- Volvo S40 (2004–2013)2008–2009Tylko silnik: B4184S11, B4184S8, B4204S3
- Volvo S40 (2004–2013)2010Tylko silnik: B4184S11, B4184S8, B4204S3, B4204S4
- Volvo S40 (2004–2013)2011–2012Tylko silnik: B4204S3, B4204S4
- Volvo V50 (2004–2013)2008–2009Tylko silnik: B4184S11, B4184S8, B4204S3
- Volvo V50 (2004–2013)2010Tylko silnik: B4184S11, B4184S8, B4204S3, B4204S4
- Volvo V50 (2004–2013)2011–2012Tylko silnik: B4204S3, B4204S4
Co oznacza ten kod błędu?
The engine control module keeps watch on the system voltage and holds it against a reference value that the CEM sends over CAN. The fault code is set when the module measures a lower voltage than the one sent. The cause is contact resistance or poor contact in the connections.
Możliwe przyczyny
- Contact resistance, oxidation or loose contact in the connections
Co możesz zrobić
- 1Check that the battery is charged and that the battery terminals are tight and not corroded
- 2Check that the fuses are intact. Their locations are in the owner's manual
- 3Check the connectors at the engine control module and the CEM for play, oxidation and contact resistance
- 4If you have a diagnostic tool: compare the voltage the engine control module shows in live data with the battery voltage at the terminals
- 5Erase the fault code and road test the car to see whether it comes back
- 6If the fault remains, have a workshop check the earth and the wiring to the engine control module
Objawy, które możesz zauważyć1
- No noticeable symptoms for the driver
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.