VOLVO
ECM-P001622 - Crankshaft Position - Camshaft Position Correlation - Bank 1 Sensor A. General Signal Failures. Signal too high
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
10 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Pokaż modele wg rocznika i silnika (32)
- Volvo S60 (2011–)2011–2012Tylko silnik: B6304T4
- Volvo S60 (2011–)2013Tylko silnik: B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
- Volvo S60 (2011–)2014Tylko silnik: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
- Volvo S60 (2011–)2015Wszystkie silniki oprócz: B4164T, B4164T2, B4164T3, D4162T, D4204T5, D5204T3, D5204T7, D5244T11, D5244T15, D5244T23
- Volvo S80 (2007–)2010Tylko silnik: B6304T2, B6324S, B6324S2, B8444S
- Volvo S80 (2007–)2011Tylko silnik: B6304T4, B6324S4, B6324S5, B8444S
- Volvo S80 (2007–)2012Tylko silnik: B6304T4, B6324S4, B6324S5
- Volvo S80 (2007–)2013Tylko silnik: B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
- Volvo S80 (2007–)2014Tylko silnik: B4204T11, B4204T12, B4204T15, B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
- Volvo S80 (2007–)2015Wszystkie silniki oprócz: B4164T, D4162T, D4204T5, D5204T3, D5244T15
- Volvo V40 (2013–)2013–2014Tylko silnik: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 (2013–)2015Tylko silnik: B4204T11, B5204T8, B5204T9
- Volvo V40 Cross Country (2013–)2013–2014Tylko silnik: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 Cross Country (2013–)2015Wszystkie silniki oprócz: B4164T, D4162T, D4204T14, D5204T6
- Volvo V60 (2011–)2011–2012Tylko silnik: B6304T4
- Volvo V60 (2011–)2013Tylko silnik: B5204T8, B5204T9, B6304T4
- Volvo V60 (2011–)2014Tylko silnik: B4204T11, B4204T12, B4204T15, B4204T9, B5204T8, B5204T9, B5254T12, B6304T4
- Volvo V60 (2011–)2015Tylko silnik: B4204T11, B4204T12, B4204T15, B4204T9, B5204T9, B5254T12, B6304T3, B6304T4, B6304T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2010Tylko silnik: B6304T2, B6324S, B6324S2
- Volvo V70 (2008–)2011–2012Tylko silnik: B6304T4, B6324S5
- Volvo V70 (2008–)2013Tylko silnik: B5204T9, B6304T4, B6324S5
- Volvo V70 (2008–)2014Tylko silnik: B4204T11, B5204T9, B6304T4, B6324S5
- Volvo V70 (2008–)2015Tylko silnik: B4204T11, B5204T9, B6304T4
- Volvo XC60 (2009–)2010Tylko silnik: B6304T2, B6324S, B6324S2
- Volvo XC60 (2009–)2011–2013Tylko silnik: B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2014Tylko silnik: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2015Wszystkie silniki oprócz: B4204T7, D4204T5, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
- Volvo XC70 (2008–)2010Tylko silnik: B6304T2, B6324S, B6324S2
- Volvo XC70 (2008–)2011–2013Tylko silnik: B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2014–2015Tylko silnik: B4204T11, B6304T4, B6324S4, B6324S5
- Volvo XC90 (2003–)2011–2014Tylko silnik: B6324S5
Co oznacza ten kod błędu?
The engine control module compares the camshaft position with the crankshaft position and adjusts the camshaft adaptation when they do not agree. The code concerns bank 1, sensor A, and is set when the adaptation value rises above a limit. Adaptation is carried out during engine braking, and the code is checked only after it has been completed.
Możliwe przyczyny
- Incorrectly set camshafts
- Damaged VVT unit
- Poor quality engine oil
- Faulty camshaft control valve
- Damaged or worn timing chain
Co możesz zrobić
- 1Read the code and note whether it is active right now or only stored
- 2If you have a diagnostic tool: read the camshaft adaptation and timing angle in live data with the engine running, and compare with the target value
- 3Check the engine oil level and that the oil is clean and of the right quality
- 4Have a workshop remove the control valve for cleaning and check the oil passages in the cylinder head
- 5Have a workshop check the camshaft basic setting, since incorrect setting can cause this fault
- 6If the fault returns: have a workshop check the VVT unit and the timing drive
Objawy, które możesz zauważyć5
- The car lacks power when pulling away from standstill
- Engine is hard to start and cranks slowly
- Uneven idle
- Engine stalls while driving
- Check engine lamp lit or behaving abnormally
Na co może wpływać usterka1
- The control module uses a fixed value for the camshaft adaptation
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.