ECM-P001D00
VOLVO
ECM-P001D00 - Intake (A) Cam Profile Control Circuit / Open (Bank 2). General Failure Information. No sub type information
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
5 modeliS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Pokaż modele wg rocznika i silnika (10)
- Volvo S80 (2007–)2007–2010Tylko silnik: B6324S
- Volvo S80 (2007–)2011–2015Tylko silnik: B6324S5
- Volvo V70 (2008–)2008–2010Tylko silnik: B6324S
- Volvo V70 (2008–)2011–2014Tylko silnik: B6324S5
- Volvo XC60 (2009–)2010Tylko silnik: B6324S
- Volvo XC60 (2009–)2011–2015Tylko silnik: B6324S5
- Volvo XC70 (2008–)2008–2010Tylko silnik: B6324S
- Volvo XC70 (2008–)2011–2015Tylko silnik: B6324S5
- Volvo XC90 (2003–)2007–2010Tylko silnik: B6324S
- Volvo XC90 (2003–)2011–2014Tylko silnik: B6324S5
Co oznacza ten kod błędu?
The engine control module controls the variable cam profiles and monitors the control signal to the cam profile valves on the intake side, bank 2. It is a general fault with no more specific description, and it is set when the control signal is missing.
Możliwe przyczyny
- Dirty or damaged cam profile solenoid
- Poor contact or oxidation in the connections
- Open circuit in the supply wire
- Open circuit in the signal wire
Co możesz zrobić
- 1Read the code, clear it and road test the car to see whether it returns
- 2Check the connector at the bank 2 cam profile solenoid for loose or oxidised parts
- 3Use a multimeter to check that the wires to the solenoid have no open circuit
- 4Look for chafed or pinched wiring along the harness to the solenoid
- 5If you have a diagnostic tool: activate the intake-side cam profile control and check that it responds
- 6If the fault returns: have a workshop clean the cam profile solenoid, or replace it if it still malfunctions
Objawy, które możesz zauważyć5
- Emissions warning lamp lit
- Uneven idle
- Engine is hard to start
- Higher fuel consumption
- Reduced performance
Na co może wpływać usterka1
- The variable cam profile on both banks switches to the low-lift position
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.