VOLVO
ECM-P005600 - HO2S Heater Control Circuit (Bank 2, Sensor 2). General Failure Information. No sub type information
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
5 modeliS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Pokaż modele wg rocznika i silnika (12)
- Volvo S80 (2007–)2010Tylko silnik: B6324S, B8444S
- Volvo S80 (2007–)2011Tylko silnik: B6324S5, B8444S
- Volvo S80 (2007–)2012–2015Tylko silnik: B6324S5
- Volvo V70 (2008–)2010Tylko silnik: B6324S
- Volvo V70 (2008–)2011–2014Tylko silnik: B6324S5
- Volvo XC60 (2009–)2010Tylko silnik: B6324S
- Volvo XC60 (2009–)2011–2015Tylko silnik: B6324S5
- Volvo XC70 (2008–)2010Tylko silnik: B6324S
- Volvo XC70 (2008–)2011–2015Tylko silnik: B6324S5
- Volvo XC90 (2003–)2010Tylko silnik: B8444S
- Volvo XC90 (2003–)2011Tylko silnik: B6324S5, B8444S
- Volvo XC90 (2003–)2012–2014Tylko silnik: B6324S5
Co oznacza ten kod błędu?
Although the code is named as a heater control circuit, it concerns how quickly the rear oxygen sensor on bank 2, sensor 2, responds. The engine control module actively switches between rich and lean fuel and air mixture and compares how closely the sensor signal follows those switches. The sensor is judged too slow if it reacts too slowly when the mixture goes from rich to lean.
Możliwe przyczyny
- Contact resistance or oxidation in the connectors
- Damaged rear heated oxygen sensor
Co możesz zrobić
- 1Read the fault code with a diagnostic tool after a test drive and note whether it is active
- 2Make sure the fuses are intact. Their location is given in the instruction manual
- 3If you have a diagnostic tool, follow the rear oxygen sensor signal in live data during a test drive and see whether it switches between rich and lean without delay
- 4Look for contact resistance and oxidation in the connector to the rear oxygen sensor on bank 2 sensor 2
- 5If the connector is clean and intact but the signal is still slow, replace the rear oxygen sensor
Objawy, które możesz zauważyć1
- The Check engine (malfunction indicator) lamp lights up or behaves abnormally
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.