VOLVO
ECM-P00C423 - Turbocharger/Supercharger Bypass Valve "B" - Mechanical. General Signal Failures. Signal stuck low
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
8 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (8)
- Volvo S60 (2011–)2014–2015Tylko silnik: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9
- Volvo S80 (2007–)2014–2015Tylko silnik: B4204T11, B4204T12, B4204T15
- Volvo V40 (2013–)2015Tylko silnik: B4204T11
- Volvo V40 Cross Country (2013–)2015Tylko silnik: B4204T11
- Volvo V60 (2011–)2014–2015Tylko silnik: B4204T11, B4204T12, B4204T15, B4204T9
- Volvo V70 (2008–)2014–2015Tylko silnik: B4204T11
- Volvo XC60 (2009–)2014–2015Tylko silnik: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9
- Volvo XC70 (2008–)2014–2015Tylko silnik: B4204T11
Co oznacza ten kod błędu?
The engine control module (ECM) monitors the adaptation of the compressor bypass valve, meaning the learned values that control it. The code is stored when an adaptation value falls outside a predefined range.
Możliwe przyczyny
- The bypass valve adaptation value is outside the expected range
Co możesz zrobić
- 1Read and note the code, clear it and road test to see whether it returns
- 2Check that the connections to the bypass valve are fully seated and free from corrosion
- 3Look for dirt or sticking at the compressor throttle and clean it if necessary
- 4Have a workshop reset the bypass valve adaptation once the mechanical parts have been checked, then confirm with a road test that the code does not return
Objawy, które możesz zauważyć1
- No noticeable symptoms for the driver
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.