Co oznacza kod błędu ECM-P00C600?

Diagnostyka i definicja kodu błędu dla ECM-P00C600 (Volvo S60 (2011–), Volvo S80 (2007–), Volvo V40 (2013–)). Zamów naprawę w OBD Tuning.

VOLVO

ECM-P00C600 - Fuel Rail Pressure Too Low - Engine Cranking. General Failure Information. No sub type information

Układ

Sterownik silnika (ECM)

Modele Volvo, których dotyczy ten kod błędu

Dotyczy następujących modeli:

8 modeli

S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

Pokaż modele wg rocznika i silnika (8)

Co oznacza ten kod błędu?

The engine control module (ECM) compares the fuel rail pressure, measured by the fuel pressure sensor on the high-pressure side, with the pressure it requests. The code is stored when the actual pressure is too low compared with the requested pressure for a set period. The fault can be noticed when the engine is cranked, because fuel does not reach the correct pressure.

Możliwe przyczyny

High-pressure fuel pump is damaged
Fuel pressure sensor is damaged

Co możesz zrobić

1Read and note the code, clear it and road test to see whether it returns
2Check that the connector at the fuel pressure sensor on the fuel rail is fully engaged and free from corrosion
3Look for loose or chafed wiring near the sensor and along the wire to the engine control module
4If you have diagnostic equipment, compare the fuel pressure in live data with the requested pressure during cranking and at throttle input
5If the fault remains, have a workshop check the high-pressure fuel pump and the fuel pressure sensor

Objawy, które możesz zauważyć3

Engine warning lamp (check engine) lit or behaving abnormally
The engine lacks power and runs poorly
The engine hesitates or surges, especially during acceleration

Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.